Extron-electronics FOX 3G DVC User Guide User Manual download pdf (Page 21)

FOX 3G DVC • Operation 15

Audio Config Menu

The Audio Config menu enables you to adjust the level of attenuation, mute and unmute

the audio, and select the pair of audio channels on which to extract the audio from the

3G-SDI, HD-SDI, or SD-SDI signal. The flow diagram below shows the audio configuration

submenus and the adjustments that can be made from them.

AUDIO

CONFIG

AUDIO MUTE

DISABLED

GAIN/ATTEN

0 dB

Mute or unmute the audio.

• DISABLED (Default)

• ENABLED

OUTPUT

CONFIG

Tu rn either Adjust knob

to select a setting.

DECODE AUDIO

ON PAIR <1>

Select an audio pair to

extract.

• Range: 1 through 8

• Default: 1

Set the audio attenuation

for the selected input.

• Range: -18 through 0 dB

• Default: 0

Figure 16. Audio Config Menu

Audio Mute submenu

From this submenu you can mute or unmute the audio. Rotate either Adjust knob to select

Enabled to mute the audio or Disabled to unmute it.

Gain/Atten submenu

You can set only the attenuation level from this submenu. To set the attenuation,

rotate either Adjust knob to the right to decrease the attenuation and to the left to

increase it (-18 through 0 dB). The default is 0 dB.

Decode Audio on Pair <N> submenu

On this screen, you can select the channel pair on which the embedded audio will be

extracted and output onto the 5-pole captive screw audio connector. Rotate either Adjust

knob until the desired channel pair number (1 through 8) is displayed within the angle

brackets.

DECODE AUDIO

ON PAIR <1>

Figure 17. Example of a Decode Audio on Pair <N> LCD Submenu

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

Comments to this Manuals

No comments

Extron-electronics FOX 3G DVC User Guide User Manual Page 21

Comments to this Manuals

Related products and manuals for Accessories for video Extron-electronics FOX 3G DVC User Guide