Extron-electronics MVP 104GX User Guide User Manual download pdf (Page 23)

MVP 104GX Operation

3-5

User presets

Before storing any presets, first optimize the window images by setting the

picture controls (contrast, brightness, tint, color), the sizing and positioning

(horizontal and vertical), and the blanking (top, bottom, left, right). See the

“Optimizing the Image” section.

The eight user Preset buttons save/recall eight preset user-defined window

output configurations, including window positioning, sizing, blanking,

priority, test, and audio input selection.

• To save the current window configuration, while in the Default Cycle

menu (see Default cycle menu section), press the Store button for three

seconds. The green LED above the store button lights and the amber

LED above or below each Preset

button flashes for 16 seconds. The

message “Select Location To Save”

also appears on the LCD panel

during those 16 seconds. During

this time, press a Preset button to

save the configuration. The amber

LED above or below the selected

user preset button lights and the

message “User Preset Saved” appears on the

LCD panel for 16 seconds. Wait until the

Default Cycle menu resumes before pressing any

other button.

• To recall a user preset, while in the Default Cycle

menu, select a user preset button. The preset’s LED lights

amber. Any configuration modification made to a selected

user preset turns the LED off.

• Above and below the Preset buttons are slots to attach labels which

identifies the preset configurations. The 8 user presets can also be

saved/recalled through RS-232/RS-422 commands. In addition to

these 8 user presets, 16 more user presets can be saved/recalled

through RS-232/RS-422 commands only. See the Programmer’s

Guide chapter.

Factory patterns

While the LCD panel is in the Default Cycle menu (see Default

cycle menu section), pressing the Factory Patterns button displays

the LCD message “Preset ## of 20 Menu= No Next=Yes”

where ## refers to the factory pattern preset from 01 to 20.

Rotating the Vertical sizing knob recalls the 20 factory

pattern preset window output configurations.

Pressing the Menu button rejects the configuration

(=No), and pressing the Next button accepts the

configuration (=Yes). Any factory pattern preset can

be conveniently stored as a user preset (see the

previous User presets section).

See figure 3-4 for an illustration of the 20 factory pattern presets.

FACTORY

PATTERNS

Preset ## of 20

Menu=No Next= Yes

Select Location

To Save

User Preset

Recalled

User Preset

Saved

PRESETS

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 53 54

Comments to this Manuals

No comments

Extron-electronics MVP 104GX User Guide User Manual Page 23

Comments to this Manuals

Related products and manuals for Accessories for video Extron-electronics MVP 104GX User Guide