Extron electronics Two InpuT VIdeo Scaler IN1502 Setup Guide download pdf (Page 18)

Refer also to the IN1502 User’s Manual at www.extron.com.

Exit menu

From this submenu, press the Next button to return to the

default menu cycle, or press the Menu button to return to the

picture control menu.

Input Reset

To reset each input of the IN1502 scaler to its default centering

and sizing values, hold down the specic input button until the

Input # Reset message is displayed on the LCD screen.

Autoswitch must be set to "OFF" before input reset can be

used. See "Autoswitch (Autosw) mode".

System Reset

To reset the IN1502 to default values;

Remove AC power.1.

Press and hold the input 1 button while simultaneously 2.

plugging in the power cord.

The System Reset message is displayed on the LCD screen.

Front Panel Security Lockout (Executive Mode)

To prevent accidental changes to settings, executive mode locks

all front panel functions except the input selection buttons. With

executive mode active, all functions and adjustments can still be

made through RS-232 control or with the optional IR 901 remote

control. For details on RS-232 control, see chapter 3, "Serial

Communication", of the IN1502 User's Manual.

EXE MODE

ENABLED

Enable Executive Mode

Default

Cycle

EXE MODE

DISABLED

Disable Executive Mode

Default

Cycle

10 sec.

timeout

10 sec.

timeout

Press simultaneously

for 2 seconds

Press simultaneously

for 2 seconds

The input selection buttons (Input 1 and Input 2) remain

functional during front panel lockout.

IN1502 • Front Panel Operation

Front Panel Operation, cont’d

2-8

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments

Extron electronics Two InpuT VIdeo Scaler IN1502 Setup Guide Page 18

Comments to this Manuals

Related products and manuals for Video converters Extron electronics Two InpuT VIdeo Scaler IN1502