Extron electronics VSC 75 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Videoconferencing
System
VCR
Monitor
or
RS-232
Control
VSC 75
Composite
Video
S-video
VGA Input
or
Mac Input
5
0
/
6
0
H
z
1
0
0
-
2
4
0
V
0
.
3
A
S
-
V
I
D
E
O
R
S
-
2
3
2
PAL OUT
75 OHM
V
I
D
E
O
V
G
A
I
N
P
U
T
S
Extrons VSC 75 high resolution computer-to-video scan converter uses
Extrons exclusive advanced digital processing to convert high-
resolution computer-video images from as high as 1280 x 1024 @ 60 Hz
down to NTSC or PAL video for use in videoconferencing, video
recording, or viewing applications. Videoconferencing users at the near
end may integrate computer sources into their conferences by scan
converting higher-resolution signals down to composite video or
S-video for CODEC input. The VSC 75 utilizes 720 pixels per line
sampling to capture high-resolution information, ensuring sharp image
output. An internal test pattern generator outputs color bar patterns
for setting up color adjustments.
Autoscanning – Recognizes and converts computer images from
560 x 384 up to 1280 x 1024 @ 60 Hz.
VGA/Mac input – 15-pin D and HD connectors available for easy
connection to any Macintosh or IBM-compatible computer. The
passive local monitor output allows the user to display images on
the local monitor as video plays simultaneously on the display
device.
Outputs – Outputs NTSC or PAL video as composite video and
S-video outputs.
Memory locations– Includes 30 factory/user memory presets for
horizontal & vertical sizing, vertical filter, and horizontal &
vertical centering settings with autosave and auto-recall.
Internal test pattern generator – Outputs color bar patterns for
setting up color adjustments.
Picture controls – Freeze, horizontal & vertical sizing, zoom, and
horizontal & vertical centering/pan controls available.
Vertical filtering – Two user-selectable levels of vertical filtering
reduce flicker.
Simple Instruction Set (SIS™) – Extrons SIS provided for
RS-232 control via Extrons Windows®-based control program or
third-party control.
Rack-mountable – The rack-mountable VSC 75 is housed in a
1U high, 1/2 rack width enclosure.
Internal power supply – 100-240VAC, 50/60 Hz, auto-switchable
internal power supply included.
Cables included – Includes a VGA/Mac input adapter cable.
Video input
Number/type ............................ 1 VGA, 1 Mac analog RGBHV, RGBS, RGsB
Connectors .............................. VGA.................... 15-pin HD female
Mac .................... 15-pin D female
Nominal level(s) ........................ Analog — 0.7V p-p
Maximum level(s) ...................... Analog — 2.0V p-p with no offset
Impedance ................................ 75 ohms or high Z (DIP switch-selectable)
Horizontal frequency ................ Autoscan 24 kHz to 71 kHz
Vertical frequency ...................... Autoscan 50 Hz to 120 Hz
Resolution range ........................ Autoscan 560 x 384 to 1280 x 1024
Note: 1280 x 1024 is available at 60 Hz only
Video processing
Encoder .................................... 10 bit digital
Digital sampling ........................ 24 bit, 8 bits per color; 50 MHz standard
Colors ........................................ 16.8 million
Horizontal filtering .................... 1 level
Vertical filtering ........................ 2 levels (selectable)
Video output
Number/type/format
1 S-video .............................. 15.75 kHz, 525/625 lines, and
1 composite video — NTSC .. 15.75 kHz, 525 lines, or
1 composite video —
PAL (B, D, G, H, I) .......... 15.5 kHz, 625 lines
Connectors
S-video .................................. 1 4-pin mini-DIN female
Composite video .................... 1 BNC female
Nominal level .......................... 1.0V p-p
Impedance ................................ 75 ohms
Control/Remote — scan converter
Serial control port .................... RS-232, 9-pin female D connector
Baud rate and protocol ............ 9600, 8-bit, 1 stop bit, no parity
Pin configurations...................... 2 = TX, 3 = RX, 5 = GND
Program control ........................ Extrons control program for Windows
Extrons Simple Instruction Set – SIS
General
Power ........................................ 100VAC to 240VAC, 50/60 Hz, 40 Watts,
internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount .............................. Yes, with optional rack shelf, part #60-190-01
Enclosure type .......................... Metal
Enclosure dimensions .............. 1.75" H x 8.75" W x 9.50" D
4.45 cm H x 22.23 cm W x 24.13 cm D
Shipping weight ........................ 11 lbs (5 kg)
Vibration .................................. NSTA 1A in carton (National Safe Transit
Association)
Approvals .................................. UL, CE, FCC Class A, CUL
MTBF ...................................... 30,000 hours
Warranty .................................. 2 years parts and labor
Part number .................................. 60-321-01
APPLICATION
S
PECIFICATIONS
FEATURES
APPLICATION DIAGRAM
EXTRON ELECTRONICS/RGB SYSTEMS, INC.
1230 South Lewis Street, Anaheim, CA 92805
800.633.9876 714.491.1500 FAX 714.491.1517
U.S.A.
EXTRON ELECTRONICS, EUROPE
Beeldschermweg 6C, 3821 AH Amersfoort
+31.33.453.4040 FAX +31.33.453.4050
The Netherlands
EXTRON ELECTRONICS, ASIA
41B Kreta Ayer Road, Singapore 089003
+65.226.0015 FAX +65.226.0019
Singapore
EXTRON ELECTRONICS INFORMATION
E
XTRON
WEB: www.extron.com
E
XTRON
FAX: 714.491.0192
24-hour accessworldwide!
00-04
68-486-01
REV. B
Page view 1
1 2

Comments to this Manuals

No comments