Extron electronics 60-870-23 User's Guide download pdf (Page 13)

Receiver Rear Panel

The Rx (receiver) rear panel (see figure 4) has a DC power input, twisted pair link connection

and also has four female USB Type A hub connectors. AAP and Decora receivers have the

hub connectors on the front panel.

HUB

POWER

12V

1.0A MAX.

LINK

DO NOT

CONNECT

TO LAN

POWER

12V

2.0A MAX.

DO NOT

CONNECT

TO LAN

LINK

-.-A MAX

POWER

12V

DO NOT

CONNECT

TO LAN

fd e

AAP

Rack Mount

Decora

Figure 4. Receiver (Rx) Rear Panel Connectors

Power input connector — The receiver requires an external supply. Plug the included

12 VDC power supply into this 2-pole, 3.5 mm captive screw connector.

Link (twisted pair) connector — Connect the TP cable from the transmitter Link

connector (figure 3, item

) to this RJ-45 female connector.

CAUTION: Do not connect this port to a computer data or telecommunications

network.

NOTE: In order for the AAPs to fit in a junction box, the TP cables and RJ-45

connectors should not have a boot installed.

USB hub connectors (USB Extender Rx only) — The built-in four port hub uses four

female USB Type A connectors. The connections are USB 2.0 compatible, providing

+5 VDC at up to 500 mA to connected USB peripherals requiring power.

See TP Cable Termination on page 7, to properly wire the RJ-45 connectors.

USB Extenders • Installation and Operation 7

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comments to this Manuals

No comments

Extron electronics 60-870-23 User's Guide Page 13

Comments to this Manuals

Related products and manuals for Console extenders Extron electronics 60-870-23