Extron-electronics HFX 100 Rx User Manual download pdf

HFX 100 Tx and HFX 100 Rx • User Guide

This guide describes the function, installation and operation of the HFX 100 Tx transmitter and HFX 100 Rx receiver. Unless otherwise

stated, the terms “HFX 100,” “HDMI extender,” and “extender” refer to both units. The term “transmitter” refers to the HFX 100 Tx and

the term “receiver” refers to the HFX 100 Rx.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC

rules. The ClassA limits provide reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area

is likely to cause interference. This interference must be corrected at the expense of the user.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics,

see the “Extron Safety and Regulatory Compliance Guide” on the Extron website.

FDA/IEC 60825-1 Requirements

CLASS 1 LASER PRODUCT

Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 5, dated June 24,

2007.

The product is intended to be used with the ﬁber optic cables fully installed.

This product meets the applicable requirements of IEC 60825-1, Edition 1 (2007).

Any service to this product must be carried out by Extron Electronics and its qualiﬁed service personnel.

About the HFX 100 Tx and HFX 100 Rx

The Extron HFX 100 HDMI extender comprises of a transmitter (Tx) and receiver (Rx) pair, which use one multimode ﬁber optic cable to

transmit a signal up to 300meters (984 feet). The transmitter accepts a single HDMI input and converts it to a proprietary signal that is

sent over the ﬁber optic cable to the receiver. The receiver converts the signal back to an HDMI output.

The extender supports DDC and HDCP pass-through.

Features

Signal extender — converts the HDMI signal to a proprietary format that can be carried up to 300 meters (984 feet) without loss of

signal integrity.

Power supply — Both the transmitter and receiver are powered by a 12 VDC, 1A power supply (provided).

Display Data Channel (DDC) pass-through — ensures that the resolution and refresh rate of the video input signal matches the

capabilities of the display device.

High-bandwidth Digital Content Protection (HDCP) pass-through — ensures that HDCP-compliant outputs are able to display

HDCP-encrypted content.

1 2 3 4 5

Summary of Contents

Page 1 - FDA/IEC 60825-1 Requirements

1HFX 100 Tx and HFX 100 Rx • User GuideThis guide describes the function, installation and operation of the HFX 100 Tx transmitter and HFX 100 Rx rece

Page 2 - Application Diagram

2HFX 100 Tx and HFX 100 Rx • User GuideApplication DiagramPOWER12V- - A MAXOUTPUTINPUTHFX 100 TxPOWER12V- - A MAXHFX 100 RxINPUTOUTPUTSTANDBY/ONPQLS

Page 3 - Panels and Cables

3HFX 100 Tx and HFX 100 Rx • User GuidePanels and CablesFront PanelBoth the transmitter and receiver have identical front panels.ExtronExtronaFigure

Page 4 - HFX 100 Rx Rear Panel

4HFX 100 Tx and HFX 100 Rx • User Guidec Optical output connector — Connect one end of one multimode ﬁber optic cable (not provided) into this LC co

Page 5 - 68-2260-01 Rev. C

68-2260-01 Rev. C12 13Extron Headquarters+800.633.9876 Inside USA/Canada Only Extron USA - West Extron USA - East+1.714.491.1500 +1.919.850.1000+1.7

Related models: HFX 100 Tx

Comments to this Manuals

No comments

Extron-electronics HFX 100 Rx User Manual

Browse online or download User Manual for Hardware Extron-electronics HFX 100 Rx. Extron Electronics HFX 100 Rx User Manual

Summary of Contents

Related models: HFX 100 Tx

Comments to this Manuals

Related products and manuals for Hardware Extron-electronics HFX 100 Rx