Extron-electronics WPC 160 A Series User Manual download pdf

WPC 160 A Series • Installation Guide

The Extron WPC 160 A EU and WPC 160 A MK are wall mounted plates that accept video, audio, and USB signals through one

female 15-pin HD connector, one 3.5 mm tip-ring-sleeve (TRS) connector, and one USB B connector. The signals pass through

the unit without modication and are output from the back via captive screw connectors. The captive screw connectors take wires

from 18 AWG (1.02mm) to 26AWG (0.40 mm).

The two form factors are shown in the gure

at right:

z The WPC 160 A EU (left) mounts

onto 80mm one-gang European

EU junction boxes. The plate is

3.1inchesx3.1inches

(81mm x 81mm).

z The WPC 160 A MK (right) mounts

onto MK type one-gang UK

electric junction boxes. The plate is

3.35inchesx3.35inches

(85mm x 85mm).

VGA Wiring

NOTE: Extron recommends Extron MHRVGA bulk cable (part number

22‑024‑01) or assembled cables (partnumbers 26‑112‑15, 26‑112‑36,

26‑238‑01, and 26‑238‑25). The wire colors for these products are

shown in the VGA Connections table at the top of the next page. If other

cable products are used, the colors may not correspond to those shown

in the table.

The DDC and ID bit DIP switches, the +5 V pin, and the DDC pins are optional

but they can affect the monitors supported by the system (see the table to the

right of “DDC and ID Bit DIP Switch Settings” on the next page).

To connect wires from the VGA input to these modules, some wires must be

cut shorter than others (see the table in the “VGA Connections” section on the

next page). Follow these instructions:

1. Run the unterminated end of the cable to the junction box.

2. Strip away 3 inches (7.5 cm) from the end of the outer jacket of the cable.

3. Unravel each of the coaxial shields and twist each, individually, to make

awire.

4. Cut 1 inch (2.5 cm) from the end of the individual wires marked with an

asterisk in the VGA Connections table on the next page.

5. Strip 3/16 inches (5 mm) of the inner jacket from the end of each wire and

secure the wire to the appropriate captive screw connector (see the VGA

Connections and TRS Connections tables on the next page).

6. Secure the faceplate to the junction box using the screws provided (see

the gures at right).

7. Connect the VGA input, audio input, or both.

WPC 160 EU

USB

COMPUTER

AUDIO

WPC 160 MK

COMPUTER

AUDIO

USB

COMPUT ER

AUDIO

USB

30 mm M3.5

Screws (2)

UK Junction Box

Extron

WPC 160 MK

COMPUT ER

AUDIO

USB

EU Junction Box

20 mm M3

Screws (2)

Extron

WPC 160 EU

WPC 160 MK

1 2

Summary of Contents

Page 1 - VGA Wiring

1WPC 160 A Series • Installation GuideThe Extron WPC 160 A EU and WPC 160 A MK are wall mounted plates that accept video, audio, and USB signals throu

Page 2 - USB Connections

268-1798-01 Rev. C02 13Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.100

Comments to this Manuals

No comments

Extron-electronics WPC 160 A Series User Manual

Browse online or download User Manual for Hardware Extron-electronics WPC 160 A Series. Extron Electronics WPC 160 A Series User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Extron-electronics WPC 160 A Series