Extron electronics VoiceLift Operations Instructions download pdf (Page 17)

2-7

VoiceLift

™

Microphone • Operation and Features

PRELIMINARY

When the microphone is powered off:

LED Color Indication

Red – steady Battery charging

Green – steady Battery fully charged

Red and green – ﬂashing, alternating Alkaline or damaged battery detected

Microphone acoustic port — The microphone receives the audio signals via

this port. Do not block this port while the microphone is in use.

Charging contacts — When charging the microphone using the VLC 102

charging station, insert the end of the microphone containing these contacts

into one of the charging station’s slots.

Charging the icrophone

The pendant microphone can be charged by the following methods:

• In the VLC 102 charging station (provided with the VLM 2000 kit)

• Directly from the wall charger (provided with the VLM 1000 and VLM 2000 kits)

Using the VLC 102 charging station

The VLC 102 charging station provides a convenient way to charge the VLP 102

microphone’s battery overnight or between uses. The charging station can charge

two microphones simultaneously, and the microphones can start/ﬁnish charging at

different times.

The microphone battery requires up to 6 hours to charge fully, in order to provide a

full day’s use. It can be left to charge for extended periods, such as winter or spring

breaks.

Do not charge alkaline or NiCd batteries.

Follow these steps to charge the microphone using the charging station:

1. Turn off the microphone by sliding the PWR switch to Off/Mute/Chg.

The microphone should be turned off before charging. However, if it is

inadvertently left on, the microphone continues to charge, but at a slower rate. If

the microphone is on when placed in the charger, its PWR LED lights red.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

No comments

Extron electronics VoiceLift Operations Instructions Page 17