Extron electronics TP Receiver User Manual download pdf (Page 17)

TP Receivers • Installation and Operation

Installation and Operation, cont’d

TP Receivers

Appendix

Specifications,

Accessories, and Part Numbers

Specifications

Included Parts

Accessories

Cables/Adapters

8. The transmission distance may be too short. Ensure that

the UTP cable is at least 50 feet long.

9. If the Manual/Auto switch is in the manual position,

ensure that the receiver’s level controls are not set too

high. Too much level and peaking can cause display

problems.

10. For computer video from a laptop or for ungrounded AC

distribution systems, the transmitter may need to be

grounded. See Grounding the transmitter in the TP

Transmitter Family User’s Manual, part #68-546-03.

The TP T BNC DA4, the TP T 15HD 45, the

TP T A 45, and any transmitter connected to a

TP R 15HD A always receive local power so are always

grounded.

11. Call the Extron S

Sales & Technical Support Hotline if

necessary.

If the image is not displayed correctly

1. For computer/RGB video, if the output image looks too

green, ensure that the receiver’s SOG switch is off.

2. For computer video, if the picture hangs off the edge of the

screen, adjust the transmitter’s H Shift control.

DDSP disables the horizontal shift control.

The TP T 15HD 45 and TP T A 45 do not have shift

control.

3. Place the receiver’s Manual/Auto switch to manual and

adjust the level and peaking controls for optimum quality.

4. The transmission distance may be too far for remote

power. Try connecting the local 15V power supply to the

transmitter.

5. For computer video from a laptop or for ungrounded AC

distribution systems, the transmitter may need to be

grounded. See Grounding the transmitter in the TP

Transmitters Family User’s Manual, part #68-546-03.

6. If the image still does not display properly, call the Extron

Sales & Technical Support Hotline.

If the receiver’s Manual/Auto LED flashes

1. The transmission distance may be too far for remote power.

Connect the local 15V power supply to the transmitter.

2. Check the RJ-45 connector for a loose connection.

2-20

1 2 ... 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Extron electronics TP Receiver User Manual Page 17

Comments to this Manuals

Related products and manuals for Receiver Extron electronics TP Receiver