Extron electronics DSC HD-HD User's Guide

User GuideDSC HD-HDScalersHDMI-to-HDMI Scaler68-2635-01 Rev. A09 14

InstallationThis section provides a description of the DSC HD-HD rear panel connectors and instructions for cabling. Topics include:• Rear Panel Conn

A Power connector — Connect the provided 12 V, 1 A power supply to this 2-pole captive screw connector (see Wiring the Power Connector on page 8).ATT

Connecting for Remote ControlThe USB Config port on the front panel enables you to connect the DSC to a computer for configuration and firmware updati

Select one of the following radio buttons, then click the Next button:• Select the Yes, this time only radio button if you want your computer to conn

5. Windows XP or earlier: When the Completed screen appears, click Finish to close the wizard. Windows 7 or later: When the USB software has been loc

A 12 VDC, 1 A power supply is provided with the DSC HD-HD. Should it be necessary to attach a 2-pole captive screw connector to your power supply, fol

OperationThis section discusses the functions available through the front panel and the on-screen display (OSD) to configure and operate the DSC HD-HD

E Menu and Enter buttons — These buttons enable you to access and make selections from the on-screen display menus (see “Using the Front Panel Button

• Up arrow — Press this button to move upward through main menu and submenu options. This button also adjusts settings for selected submenu options.

Figure 10. Example of a Selected Submenu Option6. Press the t or  button to adjust the value in the highlighted field.7. Press Enter to confirm th

Safety InstructionsSafety Instructions • EnglishWARNING: This symbol, , when used on the product, is intended to alert the user of the presence of u

Input submenuThis submenu allows you to perform certain input adjustments and to view the active lines and pixels. Figure 11. Input Submenu (DSC HD-H

Input EDIDs Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 HzMatch Output Rate Match current DSC output resolution (EDID only)640 x

Output SubmenuThis submenu allows you to configure the output of the DSC HD-HD. Figure 12. Output Submenu• Output Resolution — This option lets you

• HDCP Notification — This option provides a means of determining if HDCP content restrictions are preventing a video signal from passing. The DSC no

NOTES: • The Audio Test pattern displays a crop pattern with AUDIO TEST in a bouncing text box. It also outputs pink noise at 48 kHz, 24 bit.• By de

Device Info ScreenThis read-only screen provides a quick view of certain selections, parameters, and status information for the DSC. Some of these ite

Resetting the Output Rate On the front panel, Hold  for XGA/720p is printed above the arrow buttons. If an output image cannot be displayed due to an

Remote Configuration and ControlThis section describes the connections through which the DSC can be configured and controlled remotely via SIS command

Error ResponsesWhen the DSC receives a valid command, it executes the command and sends a response to the host device. If the unit is unable to execut

X! = On or off (enable or disable) 0 = Off or disable 1 = On or enableX@ = Aspect ratio 1 = Fill: each input rate automatically fills the en

FCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC rule

X& = Test patterns: 0 = Off (default) 1 = Crop 2 = Alternating pixels 3 = Crosshatch 4 = Color bars 5 = Grayscale 6 = Audio test (

X1( = Verbose mode 0 = None (verbose mode and tagged responses for queries off) 1 = Verbose mode on (default) 2 = Verbose mode off, tagged resp

Command and Response Table for SIS CommandsCommand ASCII Command (Host to Scaler)Response (Scaler to Host) Additional DescriptionInput ConfigurationHDC

Command ASCII Command (Host to Scaler)Response (Scaler to Host) Additional DescriptionOutput Configuration (continued)Output HDCP ModeSet HDCP modeE S

Command ASCII Command (Host to Scaler)Response (Scaler to Host) Additional DescriptionOutput Configuration (continued)Video Mute (Defaults to unmuted a

Command ASCII Command (Host to Scaler)Response (Scaler to Host) Additional DescriptionAudio ConfigurationAudio Mute (Global setting — persists after a

Command ASCII Command (Host to Scaler)Response (Scaler to Host) Additional DescriptionAdvanced Configuration (continued)Test Pattern Set test patternE

Command ASCII Command (Host to Scaler)Response (Scaler to Host) Additional DescriptionInformation Requests (continued)Query firmware build version* Qn.

Windows-based Configuration ProgramThe Extron Product Configuration Software (PCS) is a Windows-based program for the DSC that provides a convenient w

3. On the PCS page, click the Downloads button near the center of the page (see figure 18).Figure 18. Downloads Button on the PCS Web PageDSC HD-HD

Conventions Used in this GuideNotificationsThe following notifications are used in this guide:CAUTION: Risk of minor personal injury.ATTENTION : Ris

4. On the next PCS page, click the PCS link, located near the bottom of the page.Figure 19. PCS Software Link on PCS Web PageThe Download Center scr

8. Follow the instructions on the InstallShield Wizard screens to complete the software program installation. By default the installation creates a f

5. On the main window, click the PCS menu icon in the upper-right corner (see figure 21), and select DSC HD-HD Help from the drop-down menu for the p

MountingThis section contains information on mounting the DSC scaler. See www.extron.com for available Extron mounting kits and ordering information.T

Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +

ContentsIntroduction... 1About this Guide ... 1

DSC HD-HD • Contents vi

IntroductionThis section provides an overview of the DSC HD-HD scaler, covering the following topics:• About this Guide• About the DSC HD-HD• Featu

• HDCP compliance — Fully supports HDCP-encrypted sources with selectable authorization for unencrypted content.• HDCP authentication and signal pre

Application DiagramPOWER12V0.7A MAXDSC HD-HDHDMI INPUT HDMI OUTPUTLAN3214321MODEL 80FLAT PANELExtron XTP CrossPoint 1600 Modular Digital Matrix Switch