Extron-electronics CVEQ1, CVEQ1 WM, CVEQ1 AAP User Manual download pdf (Page 7)

CVEQ1 Series • Introduction

Introduction

CVEQ1, CVEQ1 WM, CVEQ1 AAP

Chapter Two

Installation, Setup, Operation

UL Requirements

Preparing the Site and Installing the Wall Box

Front Panel Features and Cabling

Rear/Bottom/Side Panel Features and Cabling

Top/Side Panel Features and Adjustments

Mounting the CVEQ1 AAP

Mounting the CVEQ1 WM

About the CVEQ1, CVEQ1 WM, and CVEQ1 AAP

The Extron CVEQ1 is a one-input, one-output, composite video

line driver. It features a 185 MHz (-3 dB) video bandwidth.

It accepts one composite video input on a female BNC connector

and one stereo audio input on a pair of female RCA connectors.

One female BNC connector provides equalized video output,

and a ﬁve-pole captive screw connector provides for stereo

audio output.

The Extron CVEQ1 AAP is identical to the CVEQ1, except that it

is designed to be mounted in a double-space height architectural

adapter plate bracket (in a device’s faceplate or in an AAP

wallplate) for installation into a wall or furniture.

The CVEQ1 WM shares the features of the other two models,

but it has a 1-gang faceplate for installation into a UL-approved

electrical wall box set into a wall or furniture.

In this manual “CVEQ”, “CVEQ1”, and “line driver” are used to

refer to all models interchangeably unless otherwise noted.

Features

Stereo audio — Unbalanced stereo audio input can be output as

balanced or unbalanced stereo audio.

Gain adjustment — All models offer a video gain adjustment

with a range of -6 dB to +6 dB.

Equalization adjustment — Each model also features an

equalization adjustment that changes the level and

peaking of the output signal to compensate for use of long

cables. The CVEQ1 series line drivers can drive video

signals through up to 1000 feet (300 meters) of Extron RG6

cable.

1-2

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

No comments

Extron-electronics CVEQ1, CVEQ1 WM, CVEQ1 AAP User Manual Page 7