Extron-electronics VTG 400D_400 DVI Setup Guide User Manual

Browse online or download User Manual for Hardware Extron-electronics VTG 400D_400 DVI Setup Guide. Extron Electronics VTG 400D_400 DVI Setup Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Setup Guide — VTG 400D/400 DVI
1
This guide provides basic instructions for an experienced
installer to set up and operate the Extron VTG 400D/
VTG 400 DVI
Installation
Step 1 — Connect video outputs
Attach output devices to the VTG.
For RGBHV, RGBS, or RsGsBs output:
N
The 15-pin HD RGB output connector outputs RGBHV, RGBS, RGsB,
and RsGsBs.
For composite video output:
For S-video output:
For SDI/HDSDI output (VTG 400D only):
For DVI output (VTG 400 DVI only):
Step 2 — Connect audio outputs
Attach audio output devices to the VTG. Wire the connectors as shown below.
RCA (unbalanced mono audio) output 1:
3.5 mm mini phone jack (unbalanced mono left and right channels) output 2:
XLR (balanced mono) output 3:
Step 3 — Connect scope trigger
When using an oscilloscope, connect the scope’s external trigger to the trigger
connector of the VTG.
Step 4 — Power up
Power up the VTG by holding down the Power button for 1 second.
Continue on the next page for operation instructions.
RGBHV output
RGBS output
R
G
B
V
H
/HV
R
G
B
V
H
/HV
R
G
B
V
H
/HV
RGsB, RsGsBs output
Component video output
(R-Y, Y, B-Y)
R-Y
Y
B-Y
RGB
COMPOSITE
S-VIDEO
SDI/HDSDI
DVI-D
Tip (+)
Sleeve ( )
Audio Plugs.eps
RCA Connector
Sleeve ( )
Ring (R)
Tip (L)
TRIGGER
3-pin
Male
3
2
3
1
3-pin
Female
3
2
3
1
POWER
Page view 0
1 2 3 4

Summary of Contents

Page 1 - Installation

Setup Guide — VTG 400D/400 DVI1This guide provides basic instructions for an experienced installer to set up and operate the Extron VTG 400D/VTG 400

Page 2 - Quick Select Preset Buttons

Setup Guide — VTG 400D/400 DVI2Video AdjustmentsTest pattern selection buttonsDepending on the currently selected video rate, press the Video Test Pa

Page 3 - Scope Trigger Adjustments

3Executive ModePress and hold the Signal Type and Test Pattern buttons simultaneously for 2 seconds to enable/disable the top panel buttons.Pres

Page 4 - 68-786-50

Setup Guide — VTG 400D/400 DVIExtron USA - West Headquarters+800.633.9876Inside USA / Canada Only+1.714.491.1500+1.714.491.1517 FAXExtron USA - East+

Comments to this Manuals

No comments