Extron electronics A-4 User Manual download pdf (Page 20)

VSC 150 • Remote Control

Remote Control, cont’d

VSC 150

Appendix

Specifications

Accessories and Part Numbers

Specifications

Included Parts

Accessories

Using the memory feature

In addition to performing the basic functions, the IR 601

remote control provides a memory storage and recall

feature. The VSC 150 offers 30 factory-defined presets and

30 user-defined memory presets that store combinations of

size, zoom, panning, centering and filtering settings. These

settings are recalled automatically in association with a

particular input signal scan rate.

The VSC 150 also offers three additional user-defined

presets that can be recalled manually via IR 601 or RS-232

remote control.

The IR 601 has four Memory buttons for storing and

recalling up to three presets. To store and recall

combinations of settings with the IR 601, follow these steps:

1. Set the sizing/zoom, centering and filtering settings

for the desired computer video source by using the

front panel controls, RS-232 commands, or the IR 601

controls.

2. Press the Store button in the Memory area of the

IR 601 control. The Power/signal lock LED flashes for

4 seconds. During that period, press the button

labeled with the number (1, 2 or 3) corresponding to

the desired memory. The image settings are stored in

a user memory slot corresponding to that number. If

the button is pressed after the LED stops flashing, the

settings are not stored.

3. To recall a setup that has been stored in memory, press

the appropriate numbered Memory button. The

combination of zoom, sizing and filtering level

settings are recalled.

The same three user-defined presets can also be saved and

recalled using the RS-232 control. To store and recall these

memory presets via RS-232 control, follow these steps:

1. Set the sizing/zoom, centering and filtering settings

for the desired computer video source by using the

front panel controls, RS-232 commands, or the IR 601

controls.

2. Use the memory commands in the Command/

response table on page 3-5 to save or recall the presets.

3-8

1 2 ... 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

Extron electronics A-4 User Manual Page 20

Comments to this Manuals

Related products and manuals for Network switches Extron electronics A-4