Extron electronics RGB 112xi Operations Instructions Page 11
- Page / 105
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Introduction, cont’d
Integration Scaling Matrix Switcher • Introduction1-2
Introduction
About this Manual
This manual contains installation, configuration, and operating information for the
Extron ISM 482 Integration Scaling Matrix switcher.
In this manual, the terms “switcher” and “ISM” are used interchangeably to refer
to the ISM 482.
• Chapter 1, “Introduction”, identifies the switcher’s features.
• Chapter 2, “Installation”, details how to install the switcher.
• Chapter 3, “Operation”, describes how to operate the switcher and use all of
its features.
• Chapter 4, “Programer’s Guide”, provides information about programming
and operating the switcher under RS-232 control, such as from a PC or host
controller.
• Chapter 5, “Switcher Software”, details the Extron control software for
Windows
®
, which allows you to configure and operate the switcher from a
PC in a graphical environment.
• Chapter 6, “Ethernet Operation”, details configuration and operation of the
switcher using an Ethernet browser.
• Chapter 7, “Maintenance and Modifications”, provides procedures for
maintaining and modifying the switcher.
• Appendix A, “Ethernet Connection”, is a high-level Internet protocol (IP)
primer (Ethernet and Telnet).
• Appendix B, “Reference Information”, lists the switcher’s specifications and
pertinent part numbers.
About the Switcher
The ISM 482 is an eight-input, two-independently-scaled-output, video and stereo
or mono audio matrix switcher. Figure 1-1 shows a typical ISM 482 application.
The switchers accept high resolution RGB video, YUV (component) video,
S-video (Y/C), and composite video inputs; scale the inputs; and output RGBHV or
RGBS video and stereo audio. Triple-Action Switching™ (RGB delay) blanks the
screen during the switch to prevent distracting video glitches. The switcher’s two
independent scalers permit differing video formats on each input to be displayed
in different resolutions on different projectors.
Each video input is individually configurable to allow for different video formats.
The ISM allows analog RGBHV, RGBS, RGsB, and RGBcvS video, component
video, S-video, and composite video signals to be displayed on a device with a
fixed resolution and aspect ratio, such as a liquid crystal display (LCD) projector,
digital light processor (DLP) projector, or plasma display.
The ISM provides two separate outputs. The selected input can be switched to
either or both outputs. With an optional DVI output card, the ISM converts the
scaled image to DVI as an additional set of output 1 signals.
The switcher inputs all valid video signal formats on eight sets of five BNC
connectors. The ISM 482 scales the input up or down to a wide variety of output
resolutions and rates. The switcher outputs the scaled video, as RGBHV or RGBS,
on two sets of output connectors, consisting of five BNCs and a 15-pin HD
connector. These connectors share identical outputs.
Several of the output resolutions and rates include Extron’s Accu-RATE Frame
Lock™ (AFL™), a proprietary technology that locks the output frame rate to the
input rate, solving the image tearing problem that can result from different input
and output rates. The switcher features HDTV 576p, 720p, 1080p, and 1080i outputs.
u
rt
n
- 68-576-01 Rev. G 1
- Precautions 2
- FCC Class B Notice 3
- Setup and Operation 5
- Table of Contents 6
- Table of Contents, cont’d 7
- Chapter One 10
- Introduction 11
- Network/ 12
- Internet 12
- Introduction, cont’d 13
- Chapter Two 16
- Installation 17
- Mounting instructions 18
- Installation, cont’d 19
- RCA Connector 20
- 3.5 mm Stereo Plug Connector 20
- Optional output connection 22
- Ethernet connection 22
- RS-232 connection 24
- Chapter Three 26
- Operation 27
- 12345678 28
- Operation, cont’d 29
- LCD display 30
- Menu control buttons 30
- Adjustment knobs 30
- 10 sec.10 sec 32
- Output Configuration menu 34
- Advanced Configuration menu 36
- Video & Audio 40
- Configuration 40
- Exit Menu 40
- Press Next to Exit 40
- User Presets 40
- Press and hold both buttons 42
- IP information 43
- Setting up a DVD source 44
- Specific problems 46
- Chapter Four 48
- Programmer’s Guide 49
- Default address 50
- Programmer’s Guide, cont’d 51
- Picture adjustments 52
- Switcher error responses 54
- Reconfig message may not be 62
- Chapter Five 64
- Switcher Software 65
- Ethernet protocol settings 66
- Switcher Software, cont’d 67
- Installing the software 70
- Using the software 70
- Chapter Six 72
- Ethernet Operation 73
- Ethernet Operation, cont’d 75
- Freezing the output 76
- Outputting a test pattern 76
- Previewing the scan rate 76
- Using Blue-Only mode 76
- Executive mode 76
- Administration fields 78
- ISM IP Settings fields 78
- Input configuration 80
- Output resolution 82
- Output rate 82
- Chapter Seven 84
- Maintenance and Modifications 85
- Switcher 87
- Appendix A 90
- Patch (straight) cable 91
- Crossover cable 91
- Connector 91
- Ethernet Connection, cont’d 93
- Appendix B 96
- Reference Information 97
- Audio input 98
- Audio output 98
- Cables and connectors 100
- Reference Information, cont’d 101
- Extron’s Warranty 104
Related products and manuals for Recording Equipment Extron electronics RGB 112xi
(3 pages)© 2020, manymanuals.com. All rights reserved. | 1.155 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals