Extron electronics RGB 112xi Operations Instructions download pdf (Page 22)

2-7Integration Scaling Matrix Switcher • Installation

Optional output connection

DVI output connector (optional) — If the optional DVI output

card is installed, connect a DVI/DFP-compatible video display to

this DVI connector. This connector outputs the image selected for

output 1 only.

For output resolutions with less than 1024 pixels horizontally, the

optional DVI output’s true horizontal resolution is limited to 1024

pixels. For the 1365 x 1024, 1080p, and 1080i output resolutions,

the optional DVI output’s true horizontal resolution is limited to

1280 pixels. The DVI card outputs all other selected resolutions

normally. See the table on page 3-10.

Ethernet connection

Ethernet port — If desired, connect the switcher to an Ethernet LAN or WAN

via this RJ-45 connector. Ethernet control allows the operator to control the

switcher from a remote location. When connected to an Ethernet LAN or

WAN, the switcher can be accessed and operated from a computer running a

standard Internet browser.

Ethernet connection indicators — The Link and Act LEDs indicate the status

of the Ethernet connection.

The Link LED indicates that the switcher is properly connected to an Ethernet

LAN. This LED should light steadily.

The Act LED indicates transmission of data packets on the RJ-45 connector.

This LED should flicker as the switcher communicates.

LIN

ACT

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 104 105

No comments

Extron electronics RGB 112xi Operations Instructions Page 22