Extron-electronics Fox Tx_Rx AV User Guide User Manual download pdf (Page 32)

Control/remote

Serial control ports on each unit (transmitter and receiver)

Control .................................... 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel);

in parallel with front panel jack

1 RS-232, 2.5 mm mini stereo jack (front panel)

Pass-through ............................ 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)

Baud rate and protocol

Control .................................... 9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through ............................ 9600 to 115200 baud

Serial control pin conﬁgurations

Pass-through ............................ Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND

Control .................................... Captive screw connector: 3 = GND, 4 = Tx, 5 = Rx

Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND

Program control ............................. Extron's control/conﬁguration program for Windows®

Extron's Simple Instruction Set (SIS™)

General

External power supply .................... 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated

Power input requirements .............. 12 VDC, 0.6 A

Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling .......................................... Convection, vents on left side and top

Mounting

Rack mount ............................. Yes, with optional rack shelf kit

Furniture mount ...................... Yes, with optional under-desk mounting kit

Enclosure type ................................ Metal

Enclosure dimensions ..................... 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)

(4.3 cm H x 10.9 cm W x 15.2 cm D)

(Depth excludes connectors.)

Product weight ............................... 0.8 lbs (0.4 kg) per unit, 1.6 lbs (0.7 kg) per pair

Shipping weight ............................. 3 lbs (2 kg) per unit, 6 lbs (3 kg) per pair

Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety ...................................... CE, CUL, FDA Class 1, UL

EMI/EMC ................................. CE, C-tick, FCC Class A, ICES, VCCI

MTBF ............................................. 30,000 hours

Warranty ........................................ 3 years parts and labor

NOTES: All nominal levels are at ±10%.

Speciﬁcations are subject to change without notice.

FOX Tx/Rx AV • Specications 26

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

No comments

Extron-electronics Fox Tx_Rx AV User Guide User Manual Page 32