Extron electronics 14400 Setup Guide download pdf (Page 11)

14 FOX Matrix 320x and FOX Matrix 14400 • Remote Control 15FOX Matrix 320x and FOX Matrix 14400 • Remote Control

Command and Response Table for SIS Commands

Command ASCII Command

(Host to Unit)

Response

(Unit to Host)

Additional Description

Create ties

NOTES: • Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24!.

• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).

• The

tie command, the

tie command, and the

tie command can be used interchangeably, as can the

read tie command, the

tie command, and the

read tie command.

Tie input

X! to output X@ X!*X@! OutX@•InX!•All]

Tie input

to output

Example (see Note, above):

1*3!

Out03

•In01•All]

Tie input 1 to output 3.

Tie input

to output

X@ X!*X@& OutX@•InX!•RGB]

Tie input

to output

Example (see Note, above):

10*4&

Out04

•In10•RGB]

Tie input 10 to output 4.

Tie input

to output

X!*X@% OutX@•InX!•Vid]

Tie input

to output

Example (see Note, above):

7*5%

Out05

•In07•Vid]

Tie input 7 to output 5.

Read output tie

X@& X!]

Input

is tied to output

Read output tie

X@% X!]

Input

is tied to output

Read output tie

X@! X!]

Input

is tied to output

Channel mutes

Channel mute

X@*1B VmtX@*1]

Mute output

(no signal is output, but the light

output remains active).

Channel unmute

X@*0B VmtX@*0]

Unmute output

(signal is output).

Read channel mute

X@B X%]

1 = mute on, 0 = mute off.

Global channel mute

1*B

Vmt1

]

Mute all light outputs.

Global channel unmute

0*B

Vmt0

]

Unmute all light outputs.

Command ASCII Command

(Host to Unit)

Response

(Unit to Host)

Additional Description

Save and recall presets

NOTE: If you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.

Save current conguration as a

global preset

X$, SprX$]

Command character is a comma.

Example:

Spr09

]

Save current ties as preset 9.

Recall a global preset

X$. RprX$]

Command character is a period.

Example:

Rpr05

]

Recall preset 5, which becomes the current

conguration.

IP setup

Set IP address

EX^CI} IpiX^]

Read IP address

ECI} X^]

Set DHCP on or off

EX&DH} IdhX&]

Read DHCP on/off status

EDH} X&]

NOTE: • = Space

= Input number

– maximum number of inputs for your conguration (00 = untied)

= Output number

– maximum number of outputs for your conguration

= Mute

= mute on,

= mute off

NOTE:

= Global preset number

–

= IP address nnn.nnn.nnn.nnn

= DHCP

= off,

= on

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Extron electronics 14400 Setup Guide Page 11

Comments to this Manuals

Related products and manuals for Recording Equipment Extron electronics 14400