User GuideXTP T USW 103XTP SwitcherThree Input Switcher with an Integrated XTP Transmitter68-2292-01 Rev. D04 14
By default, audio input is selected automatically (see Audio input selection SIS commands on page 15 to manually select audio inputs). When input 2 or
F RS-232 Over XTP port — To pass bidirectional serial or other control signals between XTP-compatible devices, connect a control device to the 5-pole
TP Cable Termination and RecommendationsUse the following pin configurations for twisted pair cables.12345678RJ-45ConnectorInsert TwistedPair WiresPin
Contact Closure CommunicationEach port senses an external switch or contact closure. Use these ports to select an input on the switcher from a contact
Power ConnectionApply power to the switcher locally with the provided power supply or remotely with a power injector or a matrix switcher.ATTENTION:
Remote powerThe XTP T USW 103 can be powered remotely through an XTP Power Injector or through an XTP matrix switcher.ATTENTION: XTP remote power is
OperationThis section describes the front panel features and operations of the XTP T USW 103. Topics in this section include:• Front Panel Features•
Selecting an InputTo select an input from the front panel, press the input selection button that corresponds with the desired rear panel input connect
Reset ModeUse the recessed Reset button on the rear panel of the switcher to return the device to default settings or to restore factory-shipped firmw
SIS Configuration and ControlThe XTP T USW 103 can be configured and controlled using Extron Simple Instruction Set (SIS) commands or the XTP System C
Safety Instructions • EnglishWARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerou
Error ResponsesWhen the XTP T USW 103 receives an SIS command and determines that it is valid, it performs the command and sends the corresponding res
Command and Response Tables for SIS CommandsCommand ASCII Command (Host to Device)Response (Device to Host)Additional DescriptionInput CommandsInput s
Command ASCII Command (Host to Device)Response (Device to Host)Additional DescriptionBlack signal for audio onlyNOTE: The switcher uses a black signa
Command ASCII Command (Host to Device)Response (Device to Host)Additional DescriptionEDID CommandsNOTE: For EDID management, use the XTP System Confi
Command ASCII Command (Host to Device)Response (Device to Host)Additional DescriptionTest patternSet a test patternX1)J TstX1)]Set or disable a test p
XTP System Configuration SoftwareThe XTP T VGA can be configured and controlled using Extron Simple Instruction Set (SIS) commands (see SIS Configurat
Using the XTP System Configuration SoftwareThe XTP T USW 103 can be controlled directly from the front panel config port or remotely from an XTP matri
Top MenuThe top menu contains three menus for configuring software settings.File menuThe File menu contains options for disconnecting from the switche
Update FirmwareThis option uploads firmware from the host device to the connected device.NOTE: If necessary, download new firmware from the Extron we
Help menuThe Help menu contains XTP System Configuration Software information, the help file, and a link to the Extron website.Figure 19. Help MenuNO
FCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC rule
Device SettingsThe Device Settings screen allows a user to view and edit various device settings for the device directly connected to the host device.
Input/Output tabClick the Input/Output tab (see figure 22, 1) to open the Input/Output screen. It contains input information and options to apply auto
Analog Video tabClick the Analog Video tab (see figure 23, 1) to open the Analog Video screen. It contains signal sampling, image shifting, and saving
Audio tabClick the Audio tab (see figure 24, 1) to open the Audio screen. It contains settings for input format and analog audio gain.Figure 24. Audi
General tabClick the General tab (see figure 25, 1) to open the General screen. It contains settings for front panel lockout (executive) mode, auto sw
Device Information panelThe Device Information panel displays device information and settings. General Information section 1 Model — Displays the dev
EDID MinderUse the EDID Minder screen to assign unique EDID to the input or match current output resolutions to the input. Click the EDID Minder icon
Import EDID1. On the EDID Minder screen, click the Add EDID to Library button (see figure 26, 8). The Browse window opens.2. Select the desired EDID
Reference InformationThis section contains mounting information and instructions for updating firmware. Topics in this section include:• Mounting• U
Updating Firmware with Firmware LoaderTo upload and update firmware for the XTP T USW 103, download the new firmware to a connected computer and uploa
Conventions Used in this GuideNotifications The following notifications are used in this guide:WARNING: A warning indicates a situation that has the
Installing Firmware Loader1. Once Firmware Loader has been downloaded, run the .exe file from the save location. The installation wizard window opens
Installing Firmware with Firmware Loader1. Connect the host device to the front panel USB port.2. Open Firmware Loader and establish a connection be
Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +
ContentsCommand and Response Tables for SIS Commands ... 15Input Commands ...
XTP T USW 103 Switcher • Contents vi
IntroductionThis section contains general information about this guide and the Extron XTP T USW 103 Universal Switcher with an integrated XTP transmit
Key FeaturesReliable cable infrastructure — Transmits HDMI or digitized analog video, audio, bidirectional RS-232 and IR, and Ethernet up to 330 feet
InstallationThis section contains information for connecting and wiring the XTP T USW 103. Topics in this section include:• Rear Panel Connectors• M
Comments to this Manuals