Extron-electronics DVI 201 User Guide User Manual download pdf (Page 16)

7. Align the two slotted holes in the bottom of the L-shaped bracket with the two

slotted holes in the base of the tray. Secure the L-shaped bracket to the base by

inserting two provided 6-32 x 5/16-inch screws through the aligned slots.

8. Move the PMK 350 up to the desired location on the ceiling pole, as close to the

ceiling as desired.

9. Secure the L-shaped bracket to the U-bolt using the included hex nuts, washers, and

lock washers. Tighten the hex nuts securely.

NOTE: Be sure to tighten the hex nuts securely enough that the PMK 350 does not

slide down the ceiling pole. A socket wrench is recommended to tighten

the hex nuts.

10. Secure the front and rear plates to the mounting tray with four of the included #6

screws.

11. If desired, choose one of the provided four sizes of self-adhesive cover sheets, and

apply it to the underside of the mounting tray.

DVI 201 • Installation and Operation 12

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

No comments

Extron-electronics DVI 201 User Guide User Manual Page 16