68-1909-01 Rev. B01 12TLP 1000MV and TLP 1000TVUser GuideTouchLink™TouchLink Touchpanels
Panel FeaturesThis section describes:TLP 1000MV Front Panel Features and OperationsTLP 1000MV Rear Panel Features and ConnectionsTLP 1000TV Front Pane
e LCD screen — has a 1024x600 resolution with a touch overlay. A graphical user interface, designed using the Extron GUI Configurator software (see pa
TLP 1000MV Rear Panel Features and ConnectionsklmnFigure 5. TLP 1000MV Rear Panel Featuresk MTP signal adjustment controls — use a small screwdriver
m Network and Power over Ethernet connector — the TLP 1000MV connects to a network using a twisted pair cable, terminated with an RJ-45 connector. Th
n Power connector — connect the two pole, 3.5 mm captive screw connector from the 12 VDC, 1.0 A power supply (not provided) to the power supply socke
TLP 1000TV Front Panel Features and Operationsab cdefdFigure 8. TLP 1000TV Front Panel Featuresa Motion sensor — is capped with a small Fresnel lens
TLP 1000TV Rear Panel Features and ConnectionsThe TLP 1000TV has a stand that allows it to be placed on desktop. The stand can be removed to VESA moun
l MTP input — a twisted pair cable, terminated with an RJ-45 connector, provides video and audio input from an Extron MTP transmitter. The MTP port i
LAN ConnectorMTP ConnectorZip-tie HolderZip-tie HolderCable RunwayFigure 11. Connecting and Securing Cablesn Power connector — connect the two pole,
o VESA mounting holes (4) — for wall mounting, use these four holes, arranged in a pattern that is in accordance with the VESA FDMI standard, type D
This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipmen
Initial Configuration and CalibrationThis section describes:• How to Access the Internal On-screen Menus• The Main, Volume, Time, Network, and Video
The sleep timer determines how long the panel will be inactive before it enters Sleep mode, when the screen goes dark to save power. The time can be c
Time ScreenMainVolumeTimeNetworkVideoExitDown UpMonth: 07Down UpHours: 13Down UpDay: 06Down UpMinutes: 32Down UpYear: 2009Figure 15. Time ScreenUse th
Video ScreenMainVolumeTimeNetworkVideoExitDown UpContrast: 064Down UpColor: 064Down UpBrightness: 128Down UpTint: 128Figure 17. Video ScreenWhen a vid
Configuration SoftwareThis section of the user guide provides information about:• The Configuration Software• Installing the Software• Using the Touc
If required, locate the Global Configurator program on the disc or website and install that also. By default, the Installer program creates and places
2. Click the Configuration tab and select System Settings, which allows the user to modify the IP settings and the date and time settings. These corr
5. Click the Touchpanel tab to open the Touchpanel Configuration page, which allows the user to alter the touchpanel and volume settings. These corres
3. From the same site, download the firmware for the TouchLink panel. Click the Download tab on the Extron home page and select the Firmware option.Fi
Updating Firmware From a Web Browser1. Power on a computer that is connected to the same network as the TLP 1000.2. From the Extron website (www.ext
FCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rule
Using GUI ConfiguratorThis section provides an overview of the GUI Configurator program. For complete information about the program, consult the GUI C
2. You can choose to:• Start a New Project — Clicking OK opens a dialog box that offers a choice of project options.Figure 28. GUI Configurator New
Navigate to the existing file and select it. A preview with information about the file appears in the pane on the right.If you are working on the proj
3. Depending on which option was selected in step 2, GUI Congurator opens to a new or existing project. The initial screen is divided into a series
5. The project can be uploaded to one or more TouchLink panels. To add a panel:a. From the Project menu, select Add > Panel:Figure 32. Add a Touc
If this project has been uploaded to the TouchLink panel before, you can choose to upload only the changes that have been made since the previous uplo
2. Select Create A New Project and click OK. The dialog box closes, leaving the Project Settings screen.Figure 35. Global Configurator Project Setti
4. Click OK. The Project Settings screen closes and is replaced by the Add Device dialog box:Figure 36. Global Configurator Add Device Dialog BoxTo
5. Click OK. The Add Device screen closes. The start-up screen, which was behind it, is now visible, showing the IP Link control processor and the av
The Add TouchPanel dialog box opens.Figure 39. Add TouchPanel Dialog Box7. Select the settings to add a touchpanel.a. Ensure the TouchLink panel mo
Conventions Used in this GuideIn this user guide, the following are used:CAUTION: A caution indicates a potential hazard to equipment or data.NOTE:
SpecicationsTLP 1000MV DisplayScreen type ... Active matrix TFT color displaySize ...
Video input — see S-video or composite video MTP transmitters' specicationsNumber/signal type ... 1 proprietary analog s
Enclosure dimensionsFaceplate ... 8.1" H x 11.2" W x 0.5" D (20.6 cm H x 28.5 cm W x 1.3 cm D)Enclosur
TLP 1000TV DisplayScreen type ... Active matrix TFT color displaySize ...
Audio outputSpeaker output ... 2 mono, 86 dB SPL, 0.1 watt, 0.1 m, half spaceFrequency response ...
Enclosure dimensions ... 7.2" H x 10.0" W x 7.3" D (18.2 cm H x 25.4 cm W x 18.6 cm D) (Includes base. Total height
Accessories and Part NumbersIncluded PartsDescriptionPart NumberTLP 1000MV TouchLink panel (wall mount, black) 60-1105-02TLP 1000MV TouchLink panel (w
MountingThis section outlines the various options for:• Rack Mounting the TLP 1000MV• Wall Mounting the TLP 1000MV• Surface Mounting the TLP 1000MV
Wall Mounting the TLP 1000MVThe TLP 1000MV can be mounted in the wall or through furniture.To mount the TLP 1000MV directly into a wall, follow these
Furniture Mounting the TLP 1000MVThe TLP 1000MV can be mounted into the surface of a lectern as follows.1. Determine the best location for the TLP 10
ContentsIntroduction... 1About the TLP 1000MV and TLP 1000TV ... 1Features ...
Wall Mounting the TLP 1000MV with a Wall BoxThe TLP 1000MV can be wall mounted using the Extron BB 1000M back box (part number 70-887-01) or the Extro
Removing the TLP 1000TV Base for VESA MountingNotch to RemoveBase CoverNotch to RemoveBack CoverFigure 45. Removing the Back and Base Covers1. Remove
3. If necessary, cut the zip tie holding the twisted pair cables to the TLP 1000TV base.4. If necessary, remove the cables from the cable runway in
Reset ModesThe TLP 1000MV and TLP 1000TV have four reset modes that correspond to four of the five reset modes for the IP Link controllers. The modes
Extron USA - West HeadquartersExtron USA - East Extron EuropeExtron AsiaExtron Japan Extron China Extron Middle EastExtron Korea Extron India+800.633
TLP 1000MV and TLP 1000TV • Contents vi
IntroductionThis guide describes the function, installation and operation of the TouchLink™ TLP 1000MV and TLP 1000TV panels. Unless otherwise stated,
Ethernet connection — provides an inexpensive, easily installed, cabling option for connecting products located anywhere else on the network.Power ove
RequirementsComputer Software and HardwareThe latest system requirements for running the configuration software can be found on the Extron Website: z G
Comments to this Manuals