68-1807-01 Rev. A10 10TouchLink TouchPanel Control SystemTLP 350MVUser GuideTouchLink™
Panels and CablingThis section of the user guide describes: TLP 350MV Front Panel Features TLP 350MV Rear Panel Features and ConnectionsTLP 350MV
There are two recessed buttons and an LED behind the bezel. Use the Extron removal tool to remove the bezel.ExtronExtronRemove bezelat tabs.Extron Rem
TLP 350MV Rear Panel Features and Connections121110Figure 5. Rear Panel Featuresj Network connector — the TLP 350MV connects to an Ethernet LAN usin
An Extron IP Link control interface must also be connected to the same network domain. Available models are listed on page 3.The LAN Port connector (s
Initial ConfigurationOn-Screen MenusThis section provides information about the on-screen menus that are used in the initial configuration and calibrati
Auto Backlight — automatically provides a suitable amount of backlighting calculated from the amount of ambient light detected by the light detector.
Time ScreenMonth: 08Day: 03Year: 2010Hours: 17Minutes: 30MainDn UpDn UpDn UpDn UpDn UpFigure 10. Time ScreenUse the Dn (down) and Up buttons or t
Video ScreenMainDn UpDn UpDn UpDn UpContrast: 063Bright: 127Color: 064Tint: 129Figure 12. Video ScreenUse the Dn (down) and Up buttons or the volu
Configuration SoftwareThis section of the user guide provides information about: The Configuration Software Installing the Software Using the Touc
If required, locate the Global Configurator program on the disc or web site and install that also. By default, the Installer program creates and places
This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipmen
2. Click on the Configuration tab and select the System Settings page, which allows the user to modify information about the IP settings and the date
5. Click on the Touchpanel tab, which allows the user to alter the touchpanel and volume settings. These correspond to the Main settings (see page 8)
3. From the same site, download the firmware for the TouchLink Panel unit. Click on the Download tab on the Extron home page and select the Firmware o
Updating Firmware From a Web Browser1. Power on a computer that is connected to the same network as the TLP 350MV.2. From the Extron web site (www.e
Using GUI ConfiguratorThis section provides an overview of the GUI Configurator program. For complete information about the program, consult the GUI Con
2. You can chose to: Start a New Project — Clicking OK opens a dialog box that offers a choice of project options.Figure 23. GUI Configurator New Pr
Download an Existing Project from a Panel — Clicking OK opens a dialog box that allows you to download a file that has been uploaded to a panel.Figu
3. Depending on which option was selected in step 2, GUI Configurator opens to a new or existing project. The initial screen is divided into a series
b. The Panel Manager dialog box opens:Figure 28. Add a TouchLink Panel (b)c. Click on the Add Panel icon to add a new panel to the list in the left
Using Global ConfiguratorNOTE: To configure the TLP 350MV, use Global Configurator version 3.0.4 or later.This section provides an overview of the Globa
FCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rule
2. Select Create A New Project and click OK. The dialog box closes, leaving the Project Settings screen.Figure 30. Global Configurator Project Settin
4. Click OK and the Project Settings screen closes and is replaced by the Add Device dialog box:Figure 31. Global Configurator Add Device Dialog BoxT
5. Click OK and the Add Device screen closes. The start-up screen, which was behind it, is now visible, showing the IPL 250 and the available ports:F
7. The Add TouchPanel dialog box opens.Figure 34. Add TouchPanel Dialog Boxa. Ensure the TouchLink Panel model is selected from the drop-down menu
SpecificationsTLP 350MV DisplayScreen type ... Active matrix TFT color displaySize ...
Audio outputSpeaker output ... 1 mono, 89 dB SPL, 0.1 watt, 0.1 m, half spaceFrequency response ...
Product weight ... 1.0 lb (0.4 kg)Shipping weight ... 3 lbs (2 kg)Vibration ...
Reference InformationThis section provides information about: Included Parts Optional AccessoriesIncluded PartsDescription Part NumberTLP 350MV 60
MountingThis section describes the procedures for mounting the TLP 350MV, including: Desktop Mounting Wall MountingDesktop MountingThe TLP 350MV c
Using a Junction Box1. Locate a wall stud and mark the position where the junction box will be placed. Use the specifications provided by the manufact
Mounting the TLP 350MV1. Use the Extron removal tool to remove the bezel from the TLP 350MV (see page 5).Extron recommends using a Power over Etherne
5. If mounting to a wall box, insert the TLP 350MV into the wall adapter plate. Two clips at the top and two clips at the bottom audibly click as the
Reset ModesOccasionally, system conflicts make it necessary to reset firmware or IP settings. Extron IP Link controllers have five reset modes, four of w
Use FactoryFirmwareReset toFactory DefaultsRun/StopEventsReset allIP SettingsThe TLP 350 reverts to the factory default firmware. Event scripting doe
Button KitsInstalling or Replacing ButtonsA default set of eight front panel buttons are installed on the TLP 350MV. Any or all of these buttons can b
4. Remove the buttons that are being replaced.5. Replace the buttons, as required, making sure that they are in the correct orientation.Remove Butto
TLP 350MV • Button Kits 40
Extron WarrantyExtron® Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of pur
Extron USA - WestHeadquarters+800.633.9876Inside USA/Canada Only+1.714.491.1500+1.714.491.1517 FAXExtron USA - East+800.633.9876Inside USA/Canada Only
ContentsIntroduction ... 1About the TLP 350 MV ... 1Features ...
TLP 350MV • Contents vi
IntroductionThis guide describes the mounting, setup and operation of the TouchLink™ TLP 350MV panel. Unless otherwise stated, the terms “Touchpanel”
The Extron GUI Configurator software, which is used to design the graphical user interface, allows the user to work with existing templates or create n
RequirementsComputer Software and HardwareThe following system requirements are recommended for running GUI Configurator or Global Configurator 3.0: O
Comments to this Manuals