Extron-electronics ISM 482 User Manual download pdf (Page 59)

ISM 482 Integrated Scaling Matrix Switcher • HTML Operation 53

HTML Operation

This section describes

• Loading the Startup (Control) Page

• Control Page

• System Configuration Page

• File Management Page

• I/O Configuration Page

The ISM 482 can be controlled and operated through its Ethernet port, connected via a

LAN or WAN, using a Web browser such as the Microsoft

Internet Explorer

®.

This chapter

describes the factory-installed HTML pages, which are always available and cannot be

erased or overwritten.

NOTE: If your Ethernet connection to the ISM is unstable, try turning off the proxy

server in your Web browser. In Internet Explorer, click Tools > Internet Options >

Connections > LAN Settings, uncheck the “Use a proxy server...” box, and then

click Ok.

Loading the Startup (Control) Page

Access the switcher using HTML pages as follows:

1. Start the Web browser program.

2. Click in the browser’s Address field.

3. Type the switcher’s IP address in the browser’s Address field.

NOTE: If the value has not been changed, the factory-specified default,

192.168.254.254, is the correct value for this field.

4. If you want the browser to display a page other than the default page (such as a custom

page that you have created and uploaded), enter a slash (/) and the name of the file to

open.

NOTES:

• The browser’s Address ﬁeld should display the address in the following format:

xxx.xxx.xxx.xxx/{optional_ﬁle_name.html}

• The following characters are invalid in ﬁle names: {space} ~ @ = ‘ [ ] { } <

> ’ “ ; : | \ and ?.

5. Press the keyboard Enter key. The switcher checks to see if it is password protected.

• If the switcher is not password protected, proceed to step 7.

• If the switcher is password protected, the Enter Network Password page (see

figure37 on the next page) appears.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 81 82

No comments

Extron-electronics ISM 482 User Manual Page 59