Extron-electronics ISM 482 User Manual Page 67
- Page / 82
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
ISM 482 Integrated Scaling Matrix Switcher • HTML Operation 61
Output Resolution, Rate, Sync Format, and Polarity
The ISM 482 scales the input signal up or down to any of a number of output resolutions
and rates. The switcher outputs the scaled video as RGBHV or RGBS, with user-selectable
polarity, via either the program or preview connectors. The table below shows the
resolutions and rates available on the ISM 482.
Resolution
50 Hz 56 Hz 60 Hz 75 Hz 85 Hz
Lock at 50/60 Hz Actual DVI output
✝
•••
•••
••
••
•
•
•
•••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••
•
•
•••••
•
•
640 x 480
800 x 600
832 x 624
848 x 480
852 x 480
1024 x 768*
1280 x 768*
1280 x 1024*
1360 x 765*
1365 x 1024
1400 x 1050*
576p HDTV*
720p* HDTV @ 60 Hz only
1080p HDTV @ 60 Hz only
1080i HDTV
* Native DVI output resolution
✝✝ The output refresh rate is auto-selected, based on the video refresh rate of input 1.
••
1366 x 768*
•••
••
1365 x 768*
1024 x 480
1024 x 600
1024 x 624
1024 x 480
1024 x 480
1024 x 768
1280 x 768
1280 x 1024
••
1200 x 800* 1200 x 800
1360 x 765
1280 x 1024
1400 x 1050
720 x 576
1280 x 720
1280 x 1080
1280 x 540
1366 x 768
1365 x 768
NOTES:
• For output resolutions with less than 1024 pixels horizontally, the optional DVI
output’s true horizontal resolution is limited to 1024 pixels. The vertical resolution
is the selected vertical resolution. For these resolutions, the ISM DVI output is
1024x {selected vertical size}. For example, if the output resolution is set to
640 x 480, the actual resolution of the DVI output card is 1024 × 480.
• For the 1365 x 1024, 1080p, and 1080i output resolutions, the optional DVI
output’s true horizontal resolution is limited to 1280 pixels. For these resolutions,
the ISM DVI output is 1280 x {selected vertical size}. For example, if the output
resolution is set to 1080p, the actual resolution of the DVI output card is 1280 x
1080.
• The DVI card outputs all other selected resolutions normally.
• Resolutions marked with an asterisk (*) in the table above are native DVI outputs,
meaning that the DVI output fully supports the selected horizontal and vertical
resolution. The DVI output resolution for these rates exactly matches the analog
resolution.
- User Guide 1
- No Photo 1
- Available yet 1
- Safety Instructions 2
- FCC Class A Notice 3
- Specifications Availability 3
- Software Commands 4
- Contents 5
- Introduction 7
- Network/ 8
- Internet 8
- Features 9
- Installation 11
- Input Connections 12
- RCA Connector 13
- 3.5 mm Stereo Plug Connector 13
- Standard Output Connections 14
- Ethernet Connection 15
- Optional Output Connection 15
- Configuration 16
- Operation 17
- Output Buttons and LEDs 18
- Selecting an input 19
- Recalling a user preset 19
- Black/Mute Button and LEDs 20
- Picture Adjustment Buttons 20
- Front Panel Operations 21
- Menu System Overview 22
- Input Configuration submenu 23
- Output Configuration menu 24
- Output Resolution submenu 24
- Advanced Configuration Menu 26
- Test Pattern submenu 27
- Blanking submenu 27
- RGB Delay submenu 27
- Enhanced Mode submenu 28
- Pixel Phase submenu 28
- PAL Film Mode submenu 28
- Reset submenu 28
- User Presets menu 29
- Save Preset submenu 29
- Erase Preset submenu 30
- Exit menu 30
- Picture Adjustments 31
- Press and hold both buttons 32
- IP Information 33
- Optimizing the Video 34
- Optimizing the Audio 35
- Troubleshooting 35
- General Checks 36
- Specific Problems 36
- Programming Guide 37
- Ethernet Link 38
- } character) 39
- Switcher-Initiated Messages 40
- Host-to-Switcher Instructions 43
- Switcher Error Responses 43
- Command Function 44
- SIS Command 44
- Response 44
- Additional description 44
- Symbol definitions 50
- Command and response table 50
- Switcher Software 53
- Ethernet protocol settings 54
- Using the Control Program 55
- Button-Label Generator 57
- Using the Software 58
- HTML Operation 59
- Control Page 61
- Freezing the Output 62
- Outputting a Test Pattern 62
- Previewing the Scan Rate 62
- Using Blue-Only Mode 62
- Executive Mode 62
- System Configuration Page 63
- ISM IP Settings Fields 64
- File Management Page 65
- I/O Configuration Page 66
- Output resolution 68
- Output rate 68
- Output format 68
- Output polarity 69
- Maintenance and 70
- Modifications 70
- Switcher 71
- Installing a Firmware Upgrade 72
- Installing a DVI Output Card 73
- Determining Default Addresses 76
- Connecting as a Telnet Client 77
- Reference 79
- Information 79
- Button Labels 80
- Extron Warranty 82
Related products and manuals for Accessories for video Extron-electronics ISM 482
(9 pages)© 2020, manymanuals.com. All rights reserved. | 1.459 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals