Extron-electronics MSG0808 User Manual download pdf (Page 22)

MSG Matrix Switchers • Operation

Operation, cont’d

3-4

To increase or decrease the audio volume of the selected output (audio versions

only):

Press the Volume increment (

) or decrement ( ) buttons until the desired sound

level is reached. To increase/decrease input volume levels, press and hold the

input button while adjusting the volume levels.

To mute/un-mute the audio (audio versions only):

To mute the last selected audio output, press the Mute button. The LED over the

Mute button will light to indicate that Mute is active and the audio will be muted.

To un-mute the audio, press the Mute button again. The LED will go out and the

audio will be un-muted.

Selecting the switching level (audio versions only)

The switcher has three different switching levels, selectable from the front panel;

level 1 is audio follows video, level 2 is video with no audio, and level 3 is audio

only. The currently selected level is indicated on the front panel by the video and

audio LEDs adjacent to the Level Select button. If both the video and audio LEDs

are lit, the switcher is set for level 1 switching. If only the video LED is lit, the

switcher is set for level 2 switching. If only the audio LED is lit, the switcher is set

for level 3 switching.

Switching only affects the level(s) indicated. If level 2 is indicated, only the video

will be switched. If level 3 is indicated, only the audio will be switched.

To toggle between switching levels, press Level Select button repeatedly until the

desired level is indicated.

Reset to factory default

To restore input/output configurations, volume levels, and RS-232 settings to

factory default, press the Input 1 and Input 5 buttons at the same time.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

No comments

Extron-electronics MSG0808 User Manual Page 22