Extron-electronics MSG0808 User Manual download pdf (Page 38)

MSG Matrix Switchers • Remote Control

Remote Control, cont’d

5-8

Change input volume level - global

[VINx] Changes the volume level for all inputs.

• Where:

x = + (plus sign) to increment the output volume.

x = - (minus sign) to decrement the output volume.

x = @ to return the output volume to factory default.

x = ? to request the current volume level.

Preset commands

The MSG0804 and MSG0808 can store and recall 32 preset configurations,

accessible via RS-232 commands. The MSG0804 also has 12 presets available via

the front panel and the MSG0808 has 16 presets available via the front panel. See

chapter 3, Operations for additional information on the front panel.

Command Description

Save configuration to preset

[PSVxx] Saves the current configuration to preset memory.

• Where xx = Preset number 01 - 32

Matrix switch current setting

[PRCxx] Recalls a stored preset configuration from memory.

• Where xx = Preset number 01 - 32

Remote Control from a Network

You can control the MSG0804 or MSG0808 matrix switchers from a remote location

across a Local Area Network (LAN), a Wide Area Network (WAN), or even over the

Internet.

This remote network control is available in a client-server environment, where the

PC attached to the switcher is called the server, and the PC that needs to control the

device from another location is called the client.

Enabling remote control of the switcher over a network

Both the user operating the client (remote PC) and the user operating the server

(local PC) must install the ICS100 Control Software program onto their respective

PCs. See chapter 4, Windows-based Control Program, for information on installing the

software.

Each user—the one operating the server and the one operating the client—must

follow these instructions:

Configuring the server (local) PC

1. Attach the switcher to the server PC with a serial cable from the PC’s serial

port to the switcher’s serial port. For information on wiring the cable, see

Remote Control Port (RS-232/RS-422/RS-485) earlier in this chapter.

2. Click the Windows Start button, then select Programs, then ICS100, then

Serial Server. The Inline Server Software (the “server”) launches and the

Serial Port Server window opens.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

Comments to this Manuals

No comments

Extron-electronics MSG0808 User Manual Page 38

Comments to this Manuals

Related products and manuals for Accessories for video Extron-electronics MSG0808