Extron-electronics MSG0808 User Manual download pdf (Page 9)

MSG Matrix Switchers • Introduction

Bandwidth — Bandwidth is a minimum of 225 MHz (475 MHz on HR models) at

-3dB, fully loaded, allowing these switchers to switch high-resolution

computer displays.

Flexible Control Options —

– Front Panel Control — Provides push button input and output selection,

preset creation and selection, and audio volume and mute control, using

large, soft-touch, color-coded rubber buttons; LED indicators show

confirmation of current or pending ties.

– RS-232, RS-422, and RS-485 remote control — Allows third-party remote

control of features and functions using the Serial Control Protocol, or

ICS100 control software for Windows

– Remote control from a network — IP Server software (included)

provides comprehensive control of the switcher functions over a LAN,

WAN, or the Internet, via the RS-232 port.

– IR remote control — Enables the user to select inputs/outputs and adjust

volume using the optional CTL 120-2 IR Remote Control.

Front Panel Lockout mode — Locks out all front panel functions. When front

panel lockout mode is active, all controls are still available through

RS-232, RS-422, or RS-485 commands.

Rack-mountable — The 3U high, full rack width, metal enclosure is rack-

mountable.

32 presets — Store and recall up to 32 (via serial commands) or 12 (MSG0804) or

16 (MSG0808)(via front panel) different input/output configuration and

audio level presets.

Genlock input/output — Enables vertical interval switching for glitch-free

transitioins when it’s used with a blackburst generator and synchronous

video sources.

1-3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 53 54

No comments

Extron-electronics MSG0808 User Manual Page 9