Extron-electronics DMS 1600_2000_3200_3600 User Guide User Manual download pdf (Page 29)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Operation 23

Example 1: Creating a set of ties

In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the front

panel indications that result from your action.

NOTE: This example assumes that there are no ties in the current configuration.

1. Clear all selections: Press and release the Esc button. The button flashes once.

2. Select an input: Press and release the input 5 button.

1 2 3 4 5 6 7 8 15 16

INPUTS

Press the button.

The button lights.

3. Select the outputs: Press and release the output 3, output 4, and output 8 buttons.

C O N T R O L

PRESET

ENTER ESCVIEW

1 2 3 4 5 6 7 8 15 16

OUTPUTS

Press and release the buttons.

The buttons blink to indicate that the selected input will be tied

to these outputs.

The Enter button blinks

to indicate the need to

confirm the change.

NOTE: You can cancel the entire set of ties at this point by pressing and releasing

the Esc button. The Esc button flashes once and all selected input and output

buttons return to unlit or background illumination.

4. Confirm the change: Press and release the Enter button.

ENTER

All input buttons and output buttons

return to unlit or background illumination.

Press the button.

The Enter button returns to

unlit or background

illumination.

The current configuration is now input 5 tied to output 3, output 4, and output 8 (see

figure 18).

Input 5 tied

to outputs 3, 4, and 8

Input

Output

Figure 18. Example 1: Create Ties

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 120 121

No comments

Extron-electronics DMS 1600_2000_3200_3600 User Guide User Manual Page 29