Extron-electronics DMS 1600_2000_3200_3600 User Guide User Manual download pdf (Page 68)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software 62

4. Follow the on-screen instructions. By default, the installation of the Matrix Switchers

Control Program creates a C:\Program Files\Extron\ Matrix_Switchers directory,

and it places the following four icons into a group folder named “Extron Electronics\

Matrix Switchers”:

• MATRIX Switcher + Control Program

• MATRIX Switcher + Help

• Uninstall MATRIX Switcher

• Check for Matrix Updates

NOTES:

• For Windows 7 and higher, the folder is C:\Program Files (x86)\Extron\

Matrix_Switchers

• The DMS matrix switcher can support remote control via any of the following

three ports:

• Rear panel LAN port — For IP control of the system via an Ethernet LAN,

via this RJ-45 connector from anywhere in the world.

• Rear panel Remote RS-232/RS-422 port — The port can be conﬁgured

for either the RS-232 or RS-422 serial communication protocol and

operate at the 9600, 19200, 38400, or 115200 baud rate (see the serial

port parameters SIS commands on page 60 to conﬁgure the port).

• Front panel Configuration port — A USB B port.

Software Operation via Ethernet

When a matrix switcher is connected to an Ethernet WAN or LAN, up to 200 users can

operate it, locally or remotely, using the Matrix Switchers Control Program (see Ethernet

Port on page 11 for installation details).

Connection to the switcher via the Ethernet is password protected. There are two levels of

password protection: administrator and user. Administrators have full access to all switching

capabilities and editing functions. Users can select inputs and outputs, recall presets, and

view all settings with the exception of passwords. If the same password or no password

is required for logging on, all personnel log on with administrator privileges. Fields and

functions that exceed user privileges are not selectable in the Matrix Switchers Control

Program when the operator is logged on as a user.

The IP Settings/Options window (see figure 38 on page 67) provides a location for

viewing and, if connected via the RS-232 link or if logged on via the Ethernet port as an

administrator, editing settings unique to the Ethernet interface (see IP Settings/Options

Window on page 67 for more details).

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 120 121

No comments

Extron-electronics DMS 1600_2000_3200_3600 User Guide User Manual Page 68