Extron-electronics VN-Matrix 200 Series User Manual download pdf (Page 52)

3. The Serial Port Control options are shown below.

4. Using the mode drop-down menu select the client option (note that this will reveal the

destination box).

5. Using the destination drop-down menu select passthrough for the appropriate

server.

6. Change the other settings as required, then click the Save All tab.

Serial / Telnet Commands

The following commands can be used to provide basic remote control of a VN 200 system.

Commands can be issued either as part of a serial remote control configuration or by

using a Telnet application via the network.

In either case, a control session must first be initiated by sending a valid username and

password.

All commands must be terminated with a new line character (carriage return not required).

In programs such as Telnet, this is accomplished by pressing the Enter key.

Control Session Commands

user <username>

Initiates a user login. To be able to change system settings you must login using the

“admin” user account.

Example: user admin

pass <password>

Specifies the password for the user account. By default this will be ‘admin’ but may have

been changed using the web interface (see “Changing User Login Passwords”).

Example: pass admin

exit

Terminates the current remote control session.

VN-Matrix 200 Series • Serial Transport and Control Methodsl 47

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 122 123

No comments

Extron-electronics VN-Matrix 200 Series User Manual Page 52