Extron-electronics DSC HD-3G A User Guide User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
c Input signal information LEDs
DSC 3G-HD A: Input Rate LEDs — One of these four green LEDs lights when
the unit is powered on, indicating the type of input signal that is present.
Unknown: The signal does not reference SMPTE 259M, 292M, or 424M.
2.97 Gbps: SMPTE 424M — 1080p @ 50 Hz and higher or 2k @ greater
than 30 Hz
1.485 Gbps: SMPTE 292M — 720p or 1080i, 1080p @ up to 30 Hz
270 Mbps: SMPTE 259M — 480i or 576i
DSC HD-3G A: Input LEDs — These four green LEDs light to indicate presence
of an input signal and the type of audio signal if one is also present.
Signal: An input signal is present.
2Ch-LPCM: Two-channel LPCM audio signal is present.
Multi-Ch PCM: Multi-channel PCM audio signal is present.
Analog: Analog audio signal is present.
d Output signal information LEDs
DSC 3G-HD A: Output LEDs — These four green LEDs light to indicate the
presence of sync and other information about the signal being output.
Sync: Sync is present. (If the video is muted, this LED does not light.)
HDTV: Lights to indicate 2k, 1080p, 1080i, 720p, 480p, 576p rates, or
custom HDTV rates
PC: VESA standard or custom computer rates
Audio: Embedded audio is present.
DSC HD-3G A: Output LEDs — These four green LEDs light to indicate the
presence of sync and the output rate specified for the output (output rates can
be specified using SIS commands, the Windows-based control program, or the
OSD).
Sync: Sync is present. (If the video is muted, this LED does not light.)
2.97 Gbps: SMPTE 424M
1.485 Gbps: SMPTE 292M
270 Mbps: SMPTE 259M
e Menu and Enter buttons — These buttons let you access and make selections
from the on-screen display menus (see Using the Front Panel Buttons with the
OSD Menus on page 16 for detailed explanations of these buttons and the arrow
buttons.
f Navigation Buttons — These left t, right , up
, and down arrow buttons
enable you to step through the OSD submenus. You can also press them to lock
the front panel controls (executive mode) (see page 40), perform Auto-Image (see
page 35), and reset the output rate (see page 37).
DSC 3G-HD A and DSC HD-3G A • Operation 12
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Comments to this Manuals

No comments