Extron-electronics DSC HD-3G A User Guide User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
Command and Response Table for SIS Commands
Command ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Input Configuration
Input Video Format
View video format:
DSC 3G-HD A
1 * \
X@ ]
In verbose modes 2 and 3:
Vtyp 1 * X@ ]
View the detected input video
format X@ of DSC 3G-HD A.
View video format:
DSC HD-3G A
1 * \
X# ]
In verbose modes 2 and 3:
Vtyp 1 * X# ]
View the detected input video
format
X# of DSC HD-3G A.
Input EDID (DSC HD-3G A Only)
Assign EDID to input
E A * X2! EDID } Edid A 1 * X2! ]
Assign EDID resolution
and refresh rate X2! to the
DSC HD-3G A input.
View assigned EDID
data
E A 1 EDID } X2! ]
In verbose modes 2 and 3:
Edid A X2! ]
View assigned EDID resolution
and refresh rate X2! for the
DSC HD-3G A input.
Auto-Image
Execute
A
Img
]
Perform an Auto-Image on the
current input (follows current
aspect ratio setting).
Execute and Fill
1*A
Img1
]
Perform an Auto-Image and fill
entire display screen.
Execute and Follow
2*A
Img2
]
Perform an Auto-Image and
follow the aspect ratio of the
input.
Active Pixels
View
E APIX } X* ]
In verbose modes 2 and 3:
Apix1 * X* ]
Show active pixels X* for the
input. X* is 4 digits padded
with zeros.
Active Lines
View
E ALIN } X( ]
In verbose modes 2 and 3:
Alin1 * X( ]
Show active lines X( for the
input.
X( is 4 digits padded
with zeros.
NOTE: X@ = Input video format for DSC 3G-HD A: 0 = No signal, 1 = SD: 480i, 2 = SD: 576i,
3 = HD: 480p, 576p, 720p, 1080i, 1080p (up to 30 Hz), 4 = 3G: 1080p (@50, 59.94, and 60 Hz), 2k
X# = Input video format for DSC HD-3G A: 0 = No signal, 1 = HDMI, 2 = DVI, 3 = Invalid signal
X* = Active pixels: For DSC HD-3G A, ±512 of the default value.
X( = Active lines: For DSC HD-3G A, ±256 of the default value.
X2! = EDID emulations for DSC HD-3G A: 0 = Automatic: matches current output resolution (default),
1 = Custom EDID 1, 2 = Custom EDID 2, 3 = Custom EDID 3, 9 = Match the input rate.
For variables 11-96, see the SIS EDID table on page 45.
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 49
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 73 74

Comments to this Manuals

No comments