Extron-electronics DSC HD-3G A User Guide User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
Command ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Audio Configuration
Audio Mute (Global setting — persists after a power cycle)
Mute on
1 Z
Amt 1
]
Mute the selected audio input.
Mute off
0 Z
Amt 0
]
Unmute the selected audio
input.
View mute status
Z
X1) ]
In verbose modes 2 and 3:
Amt X1) ]
View audio mute status X1).
Audio Gain and Attenuation
NOTE: On the DSC 3G-HD A, these commands apply to analog audio.
Set audio gain and
attenuation
X5$ G Aud X5$ ]
Set the audio gain or
attenuation on the current input
to X5$ dB.
Increment
+G
Aud
X5$ ]
Increment (raise) the audio level
by 1 dB.
Decrement
-G
Aud
X5$ ]
Decrement (lower) the audio
level (down) by 1 dB.
View
G
X5$ ]
In verbose modes 2 and 3:
Aud X5$ ]
View the current audio level.
Audio Input Format
NOTE: DSC 3G-HD A: Selects between analog (5-pole captive screw audio input connector) and digital (embedded in
the SDI input) audio sources.
DSC HD-3G A: Selects between analog (5-pole captive screw audio input connector) and digital (embedded in
the HDMI input) audio sources.
Set to None
E I 1 * 0 AFMT } Afmt I 1 * 0 ]
Mute all audio for the input.
Set to Analog
E I 1 * 1 AFMT } Afmt I 1 * 1 ]
Select analog audio for the
input.
Set to 2CH digital or
Set to LPCM-2CH
digital
E I 1 * 2 AFMT } Afmt I 1 * 2 ]
DSC 3G-HD A: Select
two-channel digital audio for
the input (default).
DSC HD-3G A: Select LPCM
two-channel digital audio for
the input (default).
Set to 8CH digital or
Set to Multi-CH digital
E I 1 * 3 AFMT } Afmt I 1 * 3 ]
DSC 3G-HD A: Select
eight-channel digital audio for
the input.
DSC HD-3G A: Select PCM
multi-channel (eight-channel)
digital audio for the input.
NOTE: X1) = Mute or unmute audio: 0 = Unmute (default), 1 = Mute
X5$ = Audio gain and attenuation: -18 through +12 dB (For DSC 3G-HD this applies only to analog input.)
Response is 2 digits with leading + or and padded with a zero.
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 57
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 73 74

Comments to this Manuals

No comments