Extron-electronics DSC HD-3G A User Guide User Manual download pdf (Page 68)

Windows-based Control Program

The Extron Product Configuration Software (PSC) is a Windows-based program for the

DSC that provides a convenient way to configure the input and output, audio, and image

settings. It also lets you save and recall presets and perform nearly all the other functions

that can be accomplished via the front panel controls or SIS commands. The Product

Configuration Software is provided on a disk that is delivered with your DSC unit and can

also be downloaded from www.extron.com. To use the software, you must install the

program on your PC as described in the following sections.

Installing the Software from the Disk

To install the PSC software from the provided DVD:

1. Insert the Software Products DVD into your computer CD or DVD drive. The disk

should start automatically. If it does not, open your Windows Explorer and double-

click LAUNCH.EXE on the CD or DVD drive to start it.

2. On the Extron Software DVD screen (shown in figure 29), click the Software link. VD

Figure 29. DVD Main Screen

3. In the table on the Control Software screen, scroll to locate the PCS for DSC, and

click the Install link in the far right column.

Figure 30. PCS for DSC Link on Software DVD Screen

DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 62

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74

No comments

Extron-electronics DSC HD-3G A User Guide User Manual Page 68