Extron-electronics DSC HD-3G A User Guide User Manual download pdf (Page 40)

Communication Screen

This read-only screen enables you to view the RS-232 remote port baud rate (left) and

port type (right). The protocol for this port is 9600 baud, eight data bits, no stop bits, and

no parity. You cannot change any of these port parameters. (This screen is the same on

the DSC 3G-HD A and the DSC HD-3G A.)

Figure 26. Communication Screen

Device Info Screen

This read-only screen provides a quick view of certain selections, parameters, and status

information for the DSC. (All these items are also on other DSC screens. However, the

Device Info screen provides them all on a single screen for a system overview). This

screen differs between the two DSCs as follows:

• The DSC 3G-HD A Device Info screen (shown in figure 27 on the next page) shows

the AFL On and Off status and the display resolution and refresh rate (no genlock

information).

• The DSC HD-3G A Device Info screen shows the Genlock/AFL On and Off status (no

separate items for AFL or the display rate).

DSC 3G-HD A and DSC HD-3G A • Operation 34

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 73 74

No comments

Extron-electronics DSC HD-3G A User Guide User Manual Page 40