Extron-electronics DVI 201 User Guide User Manual download pdf (Page 36)

Control/remote — external device (pass-through)

Serial control port input

Transmitter ......................... RS-232 via (1) 3.5 mm, 3 pole captive screw connector

Receiver .............................. 1 set of proprietary signals on a female RJ-45 jack

Serial control port output

Transmitter ......................... 1 set of proprietary signals on a female RJ-45 jack

Receiver .............................. RS-232 via a 3.5 mm, 3 pole captive screw connector

NOTE: Protocol is mirrored between the transmitter and the receiver.

Serial control pin conﬁguration .. Captive screw connectors: 1 = TX, 2 = RX, 3 = GND

General

External power supply ................. 100 VAC to 240 VAC, 50-60 Hz, 6 W max., external; to 12 VDC, 1 A, regulated

Power input requirements ........... 12 VDC, 0.4 A for both transmitter and receiver

NOTE: Each transmitter or receiver can be powered either locally by an external power supply or remotely by

receiver or transmitter on the other end of the CAT 5/5e/6 or Extron DTP26 cable.

Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling ........................................... Convection, no vents

Thermal dissipation

115 VAC, 60 Hz

DVI 201 Tx

.................. 6.0 BTU/hr

DVI 201 Rx ................. 6.1 BTU/hr

240 VAC, 50 Hz

DVI 201 Tx

.................. 11.8 BTU/hr

DVI 201 Rx ................. 11.4 BTU/hr

Mounting

Rack mount ........................ Yes, with optional 1U rack shelf

Furniture mount ................ Yes, with optional through-desk mounting kit

Pole mount ......................... Yes, with optional mounting kit

Enclosure type ............................... Metal

Enclosure dimensions

DVI 201 Tx/Rx................... 1.0" H x 4.3" W x 3.0" D (quarter rack wide)

(2.5 cm H x 10.9 cm W x 7.6 cm D)

(Depth excludes connectors.)

DVI 201 A D Tx/Rx

Faceplate

..................... 2.6" H* x 1.3" W x 0.1" D

(6.6 cm H* x 3.3 cm W x 0.3 cm D)

(Fits the opening in a 1 gang Decora

-style wallplate.)

*Overall height is 4.1" (10.4 cm) including mounting tabs. Mounting holes are 3.8"

[9.5 cm] apart on center.

Buffer ........................... 2.7" H x 1.8" W x 0.75" D

(6.9 cm H x 4.6 cm W x 1.9 cm D)

(Depth excludes connectors.)

Product weight .............................. 0.5 lbs (0.3 kg)

Shipping weight ............................ 3 lbs (2 kg)

Vibration ......................................... ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety ................................... CE, c-UL, UL

EMI/EMC .......................... CE**, C-tick, FCC Class A**, ICES, VCCI

NOTE: **CE and FCC testing is conducted with STP (shielded twisted pair) cable.

DVI 201 • Reference Information 32

1 2 ... 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Extron-electronics DVI 201 User Guide User Manual Page 36

Comments to this Manuals

Related products and manuals for Accessories for video Extron-electronics DVI 201 User Guide