Extron-electronics ISM 482 User Manual download pdf (Page 33)

ISM 482 Integrated Scaling Matrix Switcher • Operation 27

IP Information

To set up the ISM for operation via its Ethernet port, you need to know and be able to

change the IP address. One way to do this is via the IP address and hardware address

screen.

To access the IP address and hardware address screen, press and hold the Color/Tint and

Detail buttons while you apply power to the ISM (see figure 25). When the ISM is finished

initializing, it displays both addresses.

Press and hold both buttons

simultaneously while applying power.

10 sec.

Default

Cycle

COLOR/

TINT

DETAIL

Power

Select the IP address subfield

with the Adjust knob.

Change the subfield value

with the Adjust knob.

IP Address

192.168.254.254

Hardware Address

00-80-00-00-04-04

IP Address

192.168.255

253

Hardware Address

00-80-00-00-04-04

NOTE: The hardware

address is hardcoded

and cannot be changed.

Figure 25. IP Information Flowchart

If you need to change the IP address, use the Adjust knob to select the desired subfield.

Rotate the Adjust knob to change the value. Repeat the adjustment for other subfields as

required.

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by dots

(periods). Each field can be numbered from 000 through 255. Leading zeroes, up to 3

digits total per field, are optional. Values of 256 and above are invalid.

NOTES:

• If the local system administrators have not changed the value, the factory-

speciﬁed default, 192.168.254.254, is the correct value for this ﬁeld.

• The hardware address is hardcoded and cannot be changed.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 81 82

Comments to this Manuals

No comments

Extron-electronics ISM 482 User Manual Page 33

Comments to this Manuals

Related products and manuals for Accessories for video Extron-electronics ISM 482