Extron-electronics MSG0808 User Manual download pdf (Page 28)

Windows-based Control Program, Cont’d

MSG Matrix Switchers • Windows-based Control Program4-6

Setting and using presets

The ICS100 Control Program can be used to create, view, save, recall, label, and

clear presets for the MSG matrix switcher. Up to 32 presets can be set using this

program. For tasks in addition to those detailed below, access the Help system

from the Interface screen.

Viewing existing presets

Select Presets from the Controls drop-down menu. The Preset Panel window

opens. Existing presets are labeled and shown on this screen.

Creating a preset

1. Set up the I/O configuration for the preset in the Control Panel.

2. Select Presets from the Controls drop-down menu. The Presets window

opens.

Figure 4-6 — ICS100 Presets window

3. Right-click on the number you want to assign to the preset, then click the Save

button. The preset is saved to the selected number.

4. Close the Presets window.

Recalling a preset

1. Select Presets from the Controls drop-down menu. The Presets window

opens.

2. Click on the number of the preset you want to recall, then press the Recall

button. The preset configuration is activated.

3. Close the Presets window.

Opening the Options menu

Click the Controls option on the menu bar. A drop-down menu listing the various

options available to your switcher is displayed.

Enabling/disabling front panel control

The current state of front panel control is indicated by the presence or absence of a

check mark next to Front Panel Enable on the Options menu. If a check mark

appears, front panel controls are enabled. If a check mark does not appear, front

panel controls are disabled. To toggle front panel controls on or off, click Front

Panel Enable with your mouse pointer.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

No comments

Extron-electronics MSG0808 User Manual Page 28