Extron-electronics MSG0808 User Manual download pdf (Page 34)

MSG Matrix Switchers • Remote Control

Remote Control, cont’d

Command Table

Set-up commands

Use these commands to configure the switcher. If you are using a third-party

control system, you should place these commands in the start-up section of the

program. You only need to send these commands to the switcher once.

Command Description

Request information

[ARC] Request for model and version information.

Reset comm port

[CPx@] Resets the communications port to the factory default (9600

baud, 8-bit, 1 stop bit, no parity, and no flow control)

• Where x = 1

Query comm port

[CPx?] Query the communications port for current settings

• Where x = 1

Configure comm port

[CPxbpsfd] Configures the communications port for baud rate, flow

control, and duplex

• Where:

x = 1

b = 0 for 1200, 1 for 2400, 2 for 4800, 3 for 9600, 4 for

19200, and 5 for 38400

p = 0 (no parity)

s = 0 (1 stop bit)

f = 0 to disable flow control and 1 to enable flow control

(xOn/xOff)

d = 0 (full duplex) or 1 (half duplex)

Default is 9600 baud, 1 stop bit, 8 data bits, no parity, no flow control, and full duplex

Factory reset

[DFLTx] Performs a factory reset. The partial reset will return I/O

configurations, volume levels, and serial set-up to factory

levels. The full reset will return all parameters (including

presets) to factory default levels.

• Where:

x = 0 for partial reset

x = 1 for for full reset

Front panel executive mode

[FPx] Enable or disable front panel executive mode and request

current status.

• Where:

x = 0 to enable executive mode (no front panel operation)

x = 1 to disable executive mode

x = ? to request current state

x = (blank) to toggle the current state

Serial response enable

[RESx] Enable or disable serial responses from the switcher.

• Where

x = 0 to disable

x = 1 to enable

5-4

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

Comments to this Manuals

No comments

Extron-electronics MSG0808 User Manual Page 34

Comments to this Manuals

Related products and manuals for Accessories for video Extron-electronics MSG0808