Extron-electronics ISM 482 User Manual Page 47
- Page / 82
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Command and Response Table for SIS Commands (continued)
ISM 482 Integrated Scaling Matrix Switcher • Programming Guide 41
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Detail filter (S-video and composite video inputs)
NOTES:
• Composite and S-video inputs support a single detail filter only, rather than separate horizontal and vertical filters. To apply a detail
filter to the scaled output when the input is composite video or S-video, use the same command as the horizontal filter (D) with the
X1&
variable.
• The
X@
value specified is the output to which the filtered input is switched.
Set a specific filter value
X@
*
X1&
D
X@
Dhz
X1&]
Set the detail filter level.
Increment filter value
X@
+D
X@
Dhz
X1&]
Increase the detail filter level.
Decrement filter value
X@
–D
X@
Dhz
X1&]
Decrease the detail filter level.
View the vertical filter value
X@
D
X1&]
Show the detail filter level.
Auto Memories
Auto memories on
1M
Aut1
]
Set the ISM to apply auto memories
settings to all selected inputs.
Auto memories off
0M
Aut0
]
Set the ISM to not apply auto
memories settings.
View auto memories status
M
X#]
Auto memories is
X#
(on or off) for all
inputs.
User presets
NOTE: The
X@
value specified is the output to which the input with the associated user preset is switched.
Save user preset
X@
*
X1*
, Spr
X@
•
X1*]
Command code is comma. Save the
X@
outputs settings as preset
X1*
.
Recall user preset
X@
*
X1*
. Rpr
X@
•
X1*]
Command code is period. Recall
preset
X1*
settings for
X@
output.
Freeze
Enable
X@
*1F
X@
Frz1
]
Output a “frozen” video image.
Disable
X@
*0F
X@
Frz0
]
Turn off freeze (output motion video).
View the freeze status
X@
F
X#]
Show the freeze status.
Example:
1F
0
]
Freeze mode is off for the program output.
Test pattern
Select test pattern for an output
X1(
*
X2!
J Tst
X1(
*
X2!]
Select a test pattern for the
X1(
outputs.
View test pattern
J
X1(
*
X2!]
Show the test pattern.
Example:
J
3*002
]
Crosshatch test pattern was selected for
both outputs.
NOTE: X@ = Output number 1 or 2
X# = Freeze status 0 = off, 1 = on
X1& = Composite and S-video detail filter 1 thru 7
X1* = Preset number 01 thru 03
X1( = Program/preview output selection 0
= Output 1 Off / Output 2 Off
2
= Output 1 Off / Output 2 On
1
= Output 1 On / Output 2 Off
3
= Output 1 On / Output 2 On
X2! = Test pattern type 001
= color bars
006
= alternating pixels
002
= crosshatch
007
= film aspect ratio 1.78
003
= 4x4 crosshatch
008
= film aspect ratio 1.85
004
= gray scale
009
= film aspect ration 2.35
005
= crop
010
= ramp
- User Guide 1
- No Photo 1
- Available yet 1
- Safety Instructions 2
- FCC Class A Notice 3
- Specifications Availability 3
- Software Commands 4
- Contents 5
- Introduction 7
- Network/ 8
- Internet 8
- Features 9
- Installation 11
- Input Connections 12
- RCA Connector 13
- 3.5 mm Stereo Plug Connector 13
- Standard Output Connections 14
- Ethernet Connection 15
- Optional Output Connection 15
- Configuration 16
- Operation 17
- Output Buttons and LEDs 18
- Selecting an input 19
- Recalling a user preset 19
- Black/Mute Button and LEDs 20
- Picture Adjustment Buttons 20
- Front Panel Operations 21
- Menu System Overview 22
- Input Configuration submenu 23
- Output Configuration menu 24
- Output Resolution submenu 24
- Advanced Configuration Menu 26
- Test Pattern submenu 27
- Blanking submenu 27
- RGB Delay submenu 27
- Enhanced Mode submenu 28
- Pixel Phase submenu 28
- PAL Film Mode submenu 28
- Reset submenu 28
- User Presets menu 29
- Save Preset submenu 29
- Erase Preset submenu 30
- Exit menu 30
- Picture Adjustments 31
- Press and hold both buttons 32
- IP Information 33
- Optimizing the Video 34
- Optimizing the Audio 35
- Troubleshooting 35
- General Checks 36
- Specific Problems 36
- Programming Guide 37
- Ethernet Link 38
- } character) 39
- Switcher-Initiated Messages 40
- Host-to-Switcher Instructions 43
- Switcher Error Responses 43
- Command Function 44
- SIS Command 44
- Response 44
- Additional description 44
- Symbol definitions 50
- Command and response table 50
- Switcher Software 53
- Ethernet protocol settings 54
- Using the Control Program 55
- Button-Label Generator 57
- Using the Software 58
- HTML Operation 59
- Control Page 61
- Freezing the Output 62
- Outputting a Test Pattern 62
- Previewing the Scan Rate 62
- Using Blue-Only Mode 62
- Executive Mode 62
- System Configuration Page 63
- ISM IP Settings Fields 64
- File Management Page 65
- I/O Configuration Page 66
- Output resolution 68
- Output rate 68
- Output format 68
- Output polarity 69
- Maintenance and 70
- Modifications 70
- Switcher 71
- Installing a Firmware Upgrade 72
- Installing a DVI Output Card 73
- Determining Default Addresses 76
- Connecting as a Telnet Client 77
- Reference 79
- Information 79
- Button Labels 80
- Extron Warranty 82
Related products and manuals for Accessories for video Extron-electronics ISM 482
(9 pages)© 2020, manymanuals.com. All rights reserved. | 0.310 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals